GP62 W-I Fiber Optic Terminal Box is a new model based on GP62, which is used for the protective connection of cable and pigtail of branch cable to protect the storage and fusion of fiber.

 

1.     Characteristics

This product is used for the terminal protection of single core fiber cable, which is of unique structure for fiber inlet fixation and easy for operation. It can be used for both indoor and outdoor installation. Suitable for the protective connection between cables and pigtails. Suitable for the connection between optical cables and optical communication device. Small cubage, unique structure, easy installation, used indoor.

 

2.     Installation

2.1    Open the cover; loose the bolt on the pressed button and take down the fiber splice tray;

2.2    Thread the peeled fiber from the adjustable collet, thread the fiber steel core through the fixed pole, screw down the bolt and then fix the fiber on the bracket with fiber pressed button;

2.3    Splice and coil the fibers as usual and fix the splice tray orderly;

2.4    Thread the pigtails through the rubber seal ring and then fix them on the bracket with nylon tie;

2.5    Put on the cover and screw down the adjustable collet.

 

3.     Main technical indexes

3.1    Environmental temperature: －25℃～40℃

3.2    Relative humidity：＜85%(When the temperature is below 30℃)

3.3    atmospheric pressure：70～106KPa

3.4    Insulation resistance: ≥2X104MΩ/500VDC

3.5    Voltage strength: Non-puncture, no arc-over under 15KVDC／1min

3.6    Max capacity: single core is 12 fibers

3.7    Suitable fiber diameter; Φ8.5～Φ18mm