HD-203 Hi-Pot and Continuity Tester

Product explanation: This tester is used in kinds of 2-core and 3-core wires, such as speaker wire, earphone wire, power wire etc. It is designed to perform tests specified in many standards to check Resistance to high-volt and break-over of wires.

It meets the requirements of many national and international standards such as BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC, etc. But you have to get a high-volt output to cooperate with this machine to perform high-volt test.

Features:

* All of the test subjects will be done automatically.

* Test speed very quickly, all test subjects will be achieved only in less than 1 seconds.

* If the sample is incompetent, there is a alarm by noise which is different from a eligible alarm.

Technical parameter: High-volt: AC 0~3KV is allowable.

Leakage current: 0.5, 1, 1.5, 2, 2. 5, 3mA (can be made to order).

Dimensions: 360mm W, 270mm D, 120mm H, approximate.

Power source: AC 220V +-10%, 50Hz

Weight: 7kg, approximate

NOTICE: 1. Both 2-core and 3-core wires are available.