This machine is a type of special equipment matching other spiral machines. It can be used to press flat soft metallic strip to “V” or “W” shape in the production of spiral wound gaskets. The technical parameters of the machine are strictly fixed. All the performance indexes of the gaskets produced by the metallic tape have meet the international technical standards.
P.S. It has been exploited into another uses, both as a shape machine and as a spiral machine (the maximum winding diameters DN200)
Voltage:380V50 HZ
Power:0.5 KW
Rotating speed:0-1300 turn/m
Rotating speed of principal axis: speed changes randomly
Voltage adjuster:0-15V
Cylinder travel:100mm
Transducer:0-60mm
Width of the flat strip: 5.10+0.02mm
Width of finished strip: =<4.3mm
Minimum winding diameter: DN10
Maximum winding diameter: DN200
Note: If you equip your machines with other certain fittings, It can shape stainless steel of 3.2mm---6.5m