Xuelong Air Cooling Type EPS Block Molding Machine has a lifting template that can move up and down to produce foam boards of different heights, so as to reduce waste in the cutting process. The special design of double chambers and choice of different penetration ways make it possible to save energy and guarantee the quality demand of different density and different EPS, which also can result into a shorter production period and high efficiency. Precise weighting system and special control system can regulate the density of EPS board automatically and easily. Furthermore, excellent electric components and reliable design, which simplify the operation and production process, lower the fault rate.
1. Xuelong Air Cooling Type EPS Block Molding Machine can produce any size foam board (from 950 to 1250mm) with the lifting system of the lower template to meet the different height requirements of the customers.
2. After the vibration aging treatment, the machine runs much safely. The quality of the EPS finished products is more reliable with the delicate design of double gas cells.
3. The electrical system adopts PLC touch screen system for automatic control.
4. With the cooperative usage of digital electronic weigher, lift encoder and computer, adjust the product quality automatically (additional order is necessary for this machine).
1. Xuelong Air Cooling Type EPS Block Molding Machine can produce any size foam board (from 950 to 1250mm) with the lifting system of the lower template to meet the different height requirements of the customers.
2. After the vibration aging treatment, the machine runs much safely. The quality of the EPS finished products is more reliable with the delicate design of double gas cells.
3. The electrical system adopts PLC touch screen system for automatic control.
4. With the cooperative usage of digital electronic weigher, lift encoder and computer, adjust the product quality automatically (additional order is necessary for this machine).
|
Item |
Unit |
PSB-S2000 |
PSB-S6000 |
PSB-S8000 | |
|
Cavity inner net size |
mm |
2030×1020×520～820 |
6080×950～1250×630 |
8100×950～1250×630 | |
|
Finished product size |
mm |
2000×1000×500～800 |
6000×920～1220×600 |
8000×920～1220×600 | |
|
Cavity volume |
m3 |
1.04～1.66 |
3.64～4.78 |
4.84～6.37 | |
|
Density |
g/l |
5～30 |
5～50 |
5～50 | |
|
Productivity |
PCs/h |
2～30 |
2～18 |
2～15 | |
|
Steam inlet diamter |
mm |
DN65 |
DN150 |
DN150 | |
|
Steam pressure |
MPa |
0.6～0.8 |
0.6～0.8 |
0.6～0.8 | |
|
Compressed air diameter |
Inch |
1 |
11/2 |
2 | |
|
Oil pump |
Max flow |
ml/r |
35 |
35 |
35 |
|
High + Low pressure |
MPa |
12+5 |
12+5 |
12+5 | |
|
Silo |
Feeding guns |
PCs |
8 |
10 |
12 |
|
Volume |
m3 |
3 |
8 |
10 | |
|
Motor power |
Hydraulic station |
KW |
4 |
5.5 |
5.5 |
|
Elevator |
KW |
1.1 |
2.2 |
2.2 | |
|
Blower |
KW |
5.5 |
7.5 |
7.5 | |
|
Installation power |
KW |
10.6 |
15.2 |
15.2 | |
|
Overall Dimension(L*W*H) |
mm |
42×23×22 |
88×2.6×2.55 |
10.8×2.6×2.55 | |
|
Machine weight |
t |
6.5 |
12.5 |
13.5 | |