| Model | BM-CNC2ZK21 |
| NO. of axis | 2-axis |
| Qty of heads | 2 Heads,1 drilling head and 1 tufting head. |
| The stroke of X axis | 550mm |
| The stroke of Y axis | 150mm |
| Setting of Worktable | high-precision straight-line rail and ball screw,steady and durable. |
| Material of Brush Handle | Polyethylene, polystyrene, return materials, wood |
| Material of filaments | PP,nylon,bristle,stainless steel,brass wire |
| Application | To make varieties of flat brushes. |
| Diameter of filaments | 0.08mm-1.2mm |
| The length of filament(outside the hole) | 30mm |
| Diameter of hole | 1mm-6mm |
| depth of hole | 12mm |
| Maximum Drilling Speed | 360-540 holes/minute |
| Maximum tufting Speed | 240-360 holes/minute |
| Max Speed | 15000n/min |
| Motor and driver | Panasonic servo motor |
| High-speed Motor | Italian Brake Motor |
| Adjust Speed | Frequency-conversion stepless-adjustable speed |
| Replaceable Fixture | FMS type. It can be easily changed to make other kinds of brushes. |
| Head mode | Flat or Martin |
| Programme Storage | Store 100 programmes,each can imput 100 thousand processing data. |
| Program System | CNC system,high precision,stability and efficiency |
| Dimension(L*W*H) of Mechanical part | 1250mm*1400mm*1800mm |
| Dimension(L*W*H) of Controller table | 570mm*670mm*1380mm |
| Gross weight | 1T |
| Power | 3-phase 380v, 50-60Hz |
| Total power | 2.8kw |
| Compressed Air Pressure | 0.6-0.8Mpa |
1.With 5.7 LCD screen, Chinese and English interface.
2.Supports data switching. The controller can be used as a U-Disk, and it also can be connected with U-Disk.
3.Convenient to adjust the hole position with the handwheel.
4.Long life , nice feel, and reliable keypad.
5.Safe to operate.With alarming fuction ,the system will give an alam and stop to run when the machine fails.
6.Safe to operate.With alarming fuction ,the system will give an alam and stop to run when the machine fails.
7.Easy to operate and program.
8.Large capacity, it can store 2000 programmes and each programme can imput 100,000 processing data.
9. Convenient to find the specific program by choosing the program number.
10.Standard designed circuit reduces the line interference and makes sure send the correct signal.
11.You can confirm whether the hole position is right by step test after the program is saved.
12.Reasonable designed mechanical part position makes the machine good features.
13.Standard spare parts offered.
14.Spare parts are all made by our factory. It is very easy to replaceable.