Pressure loss:≤0.05Mpa
Intel temperature：≤50℃
Working period：T=60～360min
Working pressure：0.4～1.0Mpa
Regeneration air amount：3%～5%
Oil content of air inlet：≤0.01PPM
Dew point temperature：-40℃～-70℃
Control mode：computer program control
Desiccant：Active alumina and molecular sieve
Installation：indoor installation without foundation
Regeneration type：refrigeration absorption regeneration
Operation mode：alternative and continuous operation of double absorption tubes
1.Full-automatic intelligent control panel is adopted to set the functions of power supply, operation, dual-pressure protection, automatic defrosting electronic signal light.
2.Imported compressor is equipped. Refrigerating capacity is sufficient and refrigerating efficiency is increased by 20%.
3.Cooling area is big and dew point is low, which makes more than 99% of vaporous water molecule condense to liquid water drop and be discharged out of system.
4.High-efficiency cyclone separator is specifically set to integrate collision and centrifugal effect. The separation efficiency can reach 99%.
5.Regeneration air consumption amount is small. Energy consumption is low, structure is compact.It has been in leading position in the compressed air post treatment industry at home.
6.Water-cooled condenser adopts low finned copper tube with slow water flow and multiple stroking. Heat exchange efficiency is high. It can be used for a post treatment industry at home.
7.Automatic drainer can be set as required. Water removal efficiency is good (electronic type, floating ball type and combined type).
Multiform control mode (remote or local) suits the selection of different users.
8.The design of plant unit combines the standard of General Absorption Type Compressed Air Drier JB/T10532-2005 and General Refrigeration Type Compressed Air Drier JB/T10526-2005.The system is reasonable and quality is guaranteed.
Intel temperature：≤50℃
Working period：T=60～360min
Working pressure：0.4～1.0Mpa
Regeneration air amount：3%～5%
Oil content of air inlet：≤0.01PPM
Dew point temperature：-40℃～-70℃
Control mode：computer program control
Desiccant：Active alumina and molecular sieve
Installation：indoor installation without foundation
Regeneration type：refrigeration absorption regeneration
Operation mode：alternative and continuous operation of double absorption tubes
1.Full-automatic intelligent control panel is adopted to set the functions of power supply, operation, dual-pressure protection, automatic defrosting electronic signal light.
2.Imported compressor is equipped. Refrigerating capacity is sufficient and refrigerating efficiency is increased by 20%.
3.Cooling area is big and dew point is low, which makes more than 99% of vaporous water molecule condense to liquid water drop and be discharged out of system.
4.High-efficiency cyclone separator is specifically set to integrate collision and centrifugal effect. The separation efficiency can reach 99%.
5.Regeneration air consumption amount is small. Energy consumption is low, structure is compact.It has been in leading position in the compressed air post treatment industry at home.
6.Water-cooled condenser adopts low finned copper tube with slow water flow and multiple stroking. Heat exchange efficiency is high. It can be used for a post treatment industry at home.
7.Automatic drainer can be set as required. Water removal efficiency is good (electronic type, floating ball type and combined type).
Multiform control mode (remote or local) suits the selection of different users.
8.The design of plant unit combines the standard of General Absorption Type Compressed Air Drier JB/T10532-2005 and General Refrigeration Type Compressed Air Drier JB/T10526-2005.The system is reasonable and quality is guaranteed.