Product Main

Specifications

 

RCCB (Circuit Breaker) ELCB

Circuit Breaker (RCCB) Summarize
Circuit Breaker Application scope
  JVL15-63 Residual Current Circuit Breaker provide the function of isolation switching and earth leakage protection of electrical circuits. And also provide the indirect protection of the operator' s body against the dangerous effects of electric current and provide the protection of the fire caused by the electrical circuit fault.
Standard
IEC61008
  · Circumstance temperature -5° C ~ +40° C, average temperature within 24h not exceeding +35° C.
· Altitude above sea level less than 2000 m.
· Humidity not exceeding 50% at 40° C and not exceeding 90% at 25° C.
· Installation class II or III.
· Pollution class 2.
· Installation method DIN Rail mounting type.
· The external magnetism shall not be more than 5 times of terrestrial one.
· Product shall be installed at the place where there shall be no severe impact and vibration.
· Product shall be vertically mounted onto standard Din rail 35mm.
  1. Measuring component and buckling component of products is located between enter line end and entrance line end ;
2. Movement characteristic of products can not be changed with outside mechanical tool ;
3. The operating organization has the free function to take off and buckle;
4. Operate part can not be taken down from the shell outer of products , the shell can not influence the operating organization to work , the accessory group which replace the feelers pressure, should guarantee the feelers pressure does not change while running.
Type
JVL15-63
Number of poles
2P, 4P
Rated Current(In)
25, 32, 40, 63A
Rated residual operating current( I△n)
10, 30, 100, 300, 500mA
Rated residual non-operation Current( I△no)
0.5I△n
Rated Voltage(Un)
AC 2P: 230/240V 4P: 400/415V
Residual operating current scope
0.5I△n~I△n
Residual current off-time
≤ 0.3s
Type
A, AC
Ultimate short-circuit breaking capacity (Inc)
3000A
Endurance
≥ 4000
Terminal protection
IP20