1. Introduction
2. Product Features
3. Specifications
SilverPAC 1mW ZigBee Module (Stamp Interface) (HZ2013) is a type of surface mounted module that enable users to implement ZigBee/IEEE 802.15.4 compliant solution which satisfies the needs of low-cost, low-power wireless sensor networks. The module is easy-to-use, save board space and provide reliable delivery of data between devices.
SilverPAC 1mW ZigBee Module (Stamp Interface) (HZ2013) operates within the ISM 2.4GHz frequency band. The module's default configuration supports a wide range of data system applications. The module uses Ember's EM250 wireless microcontroller to provide a comprehensive solution.
State-of-art EM250 chip adopted
Stable and reliable Ember protocol stack embedded
Easy to implement ZigBee technology integration for hardware equipment manufacturers
Wide communication range and high network reliability
Table 3-01: Specifications of 1mW EM250-Based ZigBee Module (Stamp interface) (HZ2013)
|
Maximum Transmit Range
|
120m (line of sight, with PCB antenna)
150m (line of sight, with external antenna)
|
||
|
Maximum Transmit Power Output
|
0dBm
|
||
|
RF Data Rate
|
250kbps
|
||
|
Serial Interface Data Rate
(software selectable)
|
1200-115200 bps
|
||
|
Receiver Sensitivity
(1% packet error rate)
|
-93dBm
|
||
|
Supply Voltage
|
3.3V
|
||
|
Operating Current (Transmit)
|
28mA
|
||
|
Operating Current (Receive)
|
36mA
|
||
|
Power-down Current
|
0.71μA
|
||
|
Operating Frequency Band
|
ISM 2.4GHz
|
||
|
Operating Temperature
|
-40 to 85℃
|
||
|
Antenna Interface
|
PCB antenna:
|
Silvered antenna:
|
MMCX jack:
|
|
|
|
|
|
|
Interface Features
|
17 GPIO ports;
4 interrupt ports;
2 serial ports UART/SPI/I2C supported;
4*12 bits A/D ports
|
||
|
Supported Network Topologies
|
Point-to-point, Point-to-multipoint, Peer-to-peer Mesh
|
||
|
Number of Channels
(software selectable)
|
16 Direct Sequence Channels
|
||