Coating Thickness Meter
Model: CM-8855FN
1. Features:
* It meets the standards of ISO2178 and ISO 2361 as well as DIN, ASTM and BS.
* Automatic substrate recognition.
* Manual or automatic shut down.
* Two measurement mode: Single and Continuous
* Metric/Imperial conversion.
* Can communicate with PC computer for statistics and printing by the optional cable.
* Probe in built
2. Specification
Probe: In built
Display: 4 digits LCD with backlight
Range: 0~1250 μm/0~50mil(other range may be specified)
Min. radius work piece: F: Convex 1.5mm/Concave 25mm
N: Convex 3mm/ Concave 50mm
Min. measuring area: 6mm
Min. Sample thickness: 0.3mm
Resolution: 0.1 μm (0~99.9μm); 1 μm (over 100μm)
Accuracy: ±1%n or 2.5 μm or 0.1mil
Indicator: Low batter indicator.
Storage: 99s testing data
PC interface: with RS-232C interface
Power supply: 2x1.5 AAA(UM-4) battery
Operating condition: Temp. 0~50C, Humidity <95% .
Size: 126x65x35 mm
Weight: 81g
Standard accessories:
Carrying case ...................1 pc.
Operation manual ............ 1 pc.
F probe in built .................1 pc.
NF probe in built...............1 pc.
Calibration foils ..............1set.
Substrate (Iron) ................1 pc.
Substrate (Aluminium)......1 pc.
Optional accessories: RS-232C cable & software:
1.USB adaptor for RS-232C
2.Bluetooth interface
Remark:
The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminum, chrome etc.) on magnetic materials (e.g. iron, nickel etc.). It used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphate layer, copper tile, aluminum tile, some alloy tile, paper etc.
* The N probes measure the thickness of non-magnetic coating on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, and etc. It applied to aluminum, brass, non-magnetic stainless steel, etc.