Kunding Shaking Table is used to classify the ore particles whose size is within 2-0.02 mm and tungsten(wolfram),tin, niobium,tmanganese,chromium,titanium,lead,zinc,gold,iron(red iron,brown iron)which take the form of slime.
Operating principle
A shaking table consists of a slightly inclined deck on to which the materials are introduced at the feed box and distributed.At the same time ,wash water is distributed along the banlance of the feed side from a launder.The table is vibrated longitudinally by a mechanism, using a slow forward stroke and a rapid return, which causes the mineral particles to "crawl" along the deck parallel to the direction of motion .The minerals are thus subjected to two forces that due to the table motion and the flowing film of water at right angle to it. The net effect is that the particles move diagonally across the deck from the feed end and,since the effect of the flowing film depends upon the size and density of the particles,they will fan out on the table,the smalle ,denser particles riding highest towards the concentrate launder at the far end ,while the larger lighter particles are washed into the tailings launder which runs along the length of the table.
Features and advantages
1 efficient and energy-saving
2 high quality and widely used
3 long service life
Technical parameters
|
Specification |
Table for rough sand |
Table for fine sand |
Table for fine sand | |
|
Length (mm) |
4450 |
4450 |
4450 | |
|
Table size |
Transmission width(mm) |
1855 |
1855 |
1855 |
|
Concentrate end width (mm) |
1546 |
1546 |
1546 | |
|
Maximum size of minerals (mm) |
2 |
0.5 |
1.5 | |
|
Capacity (t/d) |
30-60 |
10-20 |
15-25 | |
|
Concentration of materials (%) |
25-30 |
20-25 |
15-25 | |
|
Travel(mm) |
16-22 |
11-16 |
8-16 | |
|
Frequency(F) |
45-48 |
48-53 |
50-57 | |
|
Flow of wash water (t/d) |
80-150 |
30-60 |
10-17 | |
|
Lateral slope of the table（°）
|
0-5
|
0-5
|
1-2
| |
|
Vertical Slope of the the table （°） |
1.4 |
0.92 |
-- | |
|
Angle of the table （°）
|
32-42 |
90 |
42 | |
|
Dressing area (㎡) |
7.6 |
7.6 |
7.6 | |
|
Length width ratio of the table |
2.6 |
2.6 |
2.6 | |
|
Shape of the table transverse section |
rectangle |
serration |
triangle | |
|
Power(kw) |
1.1 |
1.1 |
1.1 | |
|
Transmission structure |
eccentric link | |||
* The Technical parameters above are only for your reference,any change of model and size of the machine will not be informed .