Features and Applications:
1. Drying speed is very fast. Liquid by centrifugal spray, surface area greatly increased in high-temperature gas flow, the moment could evaporate 95 ~ 98% moisture, only a few seconds to complete the drying time.
2. Applicable to heat-sensitive materials. As the droplets and the flow of hot air and the flow direction, although the higher the temperature of hot air, but the material will not overheat in the water evaporation, drying tower temperature distribution in Figure (1) as shown.
3. The use of a wide range. A large number of very different physical properties of materials are used in this production. Such as polymers and resins; dyes, pigments category; ceramics, glass category; herbicides, insecticides category; carbohydrate category; dairy category; blood and fish products category; fertilizer category; organic and inorganic compounds category; and so on and so on.
4. Product has a good dispersibility, fluidity and solubility. This is due to be completed in an instant drying, the product can maintain even a small granular.
5. The production process is simplified operation and convenient control. For the moisture content 40-60% (special materials, up to 90%) of the solution can be dried into a powder product, after drying without further crushing and screening, reducing the production processes, improve product purity. For the product particle size, bulk density, moisture content, within a certain range can be adjusted to change the operating conditions, control, management very convenient.
Ordering Information:
1. Liquid names, physical properties; solid content (or water content), viscosity, surface tension, PH value.
2. Dry powder bulk density, allowing the residual water content, particle size, allowing maximum temperature.
3. Production, the opening time of day.
4. For energy: steam pressure available for consumption; electric capacity; for coal, oil and gas.
5. Control requirements: inlet and outlet temperature of the need for self-control.
6. Received powder requirements: whether the bag trap, the environment of the exhaust emission requirements.
7. Other specific requirements.
If you want the technical parameters, we'd like to help you.