SilverPAC 100mW EM250 ZigBee module (HZ2323) is a type of surface mounted module that enable users to implement ZigBee/IEEE 802.15.4 compliant solution which satisfies the needs of low-cost, low-power wireless sensor networks. The module is easy-to-use, save board space and provide reliable delivery of data between devices.

SilverPAC 100mW EM250 ZigBee module (HZ2323) operates within the ISM 2.4GHz frequency band. The module's default configuration supports a wide range of data system applications. The module uses Ember's EM250 wireless microcontroller to provide a comprehensive solution.

 

  State-of-art EM250 chip adopted

  Stable and reliable Ember protocol stack embedded

  Easy to implement ZigBee technology integration for hardware equipment manufacturers

  Wide communication range and high network reliability

 

 

Table 3-01: Specifications of 100mW ZigBee Module (HZ2323)

 

Typical Transmit Range	400~1400m (line of sight)
Typical Transmit Power Output	9~18dBm
RF Data Rate	250kbps
Serial Interface Data Rate (software selectable)	1200-115200 bps
Receiver Sensitivity (1% packet error rate)	-102dBm
Supply Voltage	3.3V
Operating Current (Transmit)	80~120mA
Operating Current (Receive)	42.5mA
Power-down Current	0.82μA
Operating Frequency Band	ISM 2.4GHz
Operating Temperature	-40 to 85℃
Antenna Interface	MMCX jack (connected to the MMCX plug of antenna cable); Silvered antenna; uFl connector.
Interface Features	17 GPIO ports; 4 interrupt ports; 2 serial ports UART/SPI/I2C supported; 4*12 bits A/D ports
Supported Network Topologies	Point-to-point, Point-to-multipoint, Peer-to-peer Mesh
Number of Channels (software selectable)	16 Direct Sequence Channels
Dimension	38*21*3.5 (mm)