Brief introduction of Ball Mill:

Ball Mill is mainly used to grind materials in cement, mineral, refractory, chemical industry, etc. The machine has dry and wet ways. When wet Ball Mill works, certain water and other liquid will be added into materials to increase flowability of materials, so the capacity is increased. When dry Ball Mill works, capacity is affected because material flowability is reduced, so absorbing wind device is needed on the outlet of Ball Mill, and then negative pressure is formed in the Ball Mill to increase flowability of material, so the capacity is increased.

Working principle of Ball Mill:

When Ball Mill works, motor and speed reducer transmit torque force to big and small gears of Ball Mill, so the barrel rotates. When the barrel rotates, Steel balls or other grinding media in the barrel are lifted to a certain height and fall down freely, so materials in the barrel are impacted. Grinding media mixing with materials impact and grind materials continuously. The grinding media and materials impact and grind each other when the Ball Mill rotates continuously. The final product will be discharged from outlet when it meets the request, so the grinding process is finished.

Features of Ball Mill:

1. Large application range, simple structure and convenient maintenance.

2. Large capacity and continuous work are very obvious.

3. Barrel lining and grinding media can apply various abrasive materials.

4. Installation and adjustment can be operated conveniently and easily.

 

 

Model	Speed (r/min)	Max. Weight of balls (t)	Input size (mm)	Output size (mm)	Power (KW)	Capacity (t/h)	Weight (t)
Φ 900× 1800	37	1.8	≤ 15	0.075-0.89	15	0.5-2	3.4
Φ 900× 2100	37	2.3	≤ 15	0.075-0.4	18.5	0.4-2	3.9
Φ 900× 3000	35	3.85	≤ 25	0.075-0.4	30	1.1-2.5	7.78
Φ 1200× 2400	35	4.6	≤ 25	0.075-0.4	30	1.3-3.2	8.65
Φ 1200× 2800	35	5.4	≤ 25	0.075-0.4	37	1.5-3.7	10.02
Φ 1200× 4500	35	8.6	≤ 25	0.075-0.4	45	2.7-6.79	14
Φ 1500× 3000	29	9	≤ 25	0.047-0.4	75	3.3-8.2	14.12
Φ 1500× 3500	29	10.5	≤ 25	0.047-0.4	75	3.3-8.5	15.64
Φ 1500× 4500	29	13.5	≤ 25	0.047-0.4	90	4.5-12	20
Φ 1500× 5700	29	17	≤ 25	0.047-0.4	110	2.6-14	21.5
Φ 1830× 3000	24	13.5	≤ 25	0.047-0.4	135	4-15	28
Φ 1830× 3600	24	14	≤ 25	0.047-0.4	135	4-15	29
Φ 1830× 4500	24	20	≤ 25	0.047-0.4	155	4-19	32
Φ 1830× 7000	24	31.5	≤ 25	0.047-0.4	210	6-22	36.5
Φ 2100× 3000	22	18	≤ 25	0.047-0.4	210	6.4-28	40.79
Φ 2100x3600	22	20	≤ 25	0.047-0.4	210	7-28	42
Φ 2100× 4000	22	21.5	≤ 25	0.047-0.4	210	7.6-28	43.45
Φ 2200× 3600	21.7	25	≤ 25	0.047-0.4	245	5.2-32	44
Φ 2200× 7000	21.7	46	≤ 25	0.047-0.4	380	15-38	63
Φ 2400× 3600	21	28	≤ 25	0.047-0.4	320	8-60	47
Φ 2400× 4500	21	35	≤ 25	0.047-0.4	380	8.5-60	70.5
Φ 2700× 3600	20.7	40	≤ 25	0.047-0.4	400	12-80	75.5
Φ 2700× 4500	20.7	48	≤ 25	0.047-0.4	430	12-90	102
Φ 3200× 4000	18	65	≤ 25	0.047-0.4	800	30-180	137