TN3018  Irregular Surface Test Equipment 

              Dynamic Durability Tester for Child Conveyances

 

INTRODUCTION

Simulate the child conveyances to run in a irregular surface,after doing the repeated impact test,check and evalute safety performance.

Two fixtures on handle can move in vertical and horizontal directions independently and such adjust the width to
accommodate different types and sizes of products.

TEST PRINCIPLE

Position relevant test mass in the pram body.

Standard obstacles are mounted on the conveyor system so that the wheels on each side of the vehicle are lifted
alternately. 

The vehicle shall pass over those obstacles a total of 72 000 times at a speed of 5 km/h ± 0.1 km/h.

APPLY TO

Wheeled child conveyances , strollers ,carriages etc

FEATURES AND BENEFITS

1.Display mode : touch screen display

2.Dsiplay datas : speed ,distance of trip,time

3.Control mode : PLC

4.Can preset test times, speed, time interval, etc

5.Double closed loop speed control, to ensure the accuracy of the speed

6.Special structure, which can guarantee the conveyor belt running deviation, never won't appear the
phenomenon of conveyor belt was stuck

7.Fixed clamps on handles : movable and replaceable type

8.Multiple grating protection to avoid injury

9.Power is automatically saved, can preset stop or continue to work

TECHNICAL PARAMETERS

1.Test station : one (standard type), optinal two stations

2.The conveyor belt speed : 0-2 m/s , adjustable.

3.Work width : 1000 mm

4.Vertical stroke of fixtures : 0 - 500 mm,adjustable

5.Horizontal stroke of fixtures : 0 - 300 mm,adjustable

6.Aluminum alloy impact block : according to the standards 

7.Power supply : AC220V,50Hz,5 KW

8.Dimension : 2100×1260×2000 mm

9.Weight : 450 kg

STANDARDS

GB14748,EN1888,ASTM F833 etc.