Brief introduction

Hammer Crusher/Hammer Breaker is mainly used for crushing medium-hard or brittle materials with hardness not more than 300Mpa and 15% moisture, such as coal, cement, gypsum, alumen, brick, tile, limestone, etc. It has the features of simple structure, big crushing ratio, high production efficiency, uniform particle size, etc.  This equipment can be adjusted to reach various discharged granularity as the customers' requests.

Working Principle

The main working part of Hammer Crusher is the rotor with hammers.  The rotor consists of main shaft, disk, hinge pin and hammers.  A sieve plate is below the rotor. The motor drives the rotor to rotate at a high speed.    When the materials get into the crushing cavity, they are crushed by the rotating hammers, the crushed products which meet the required size can be discharged from the sieve plate and become the final products, the products with larger size are brought back to the crushed area for being re-crushed until they reach the required size.

Technical parameters

 

Model	Rotor speed (r/min)	Input opening size(mm)	Max. feed size (mm)	Discharged  Size  (mm)	Capacity (t/h)	Power (kw)	Weight (t)	Overall Dimension (L×W×H) (mm)
Φ400×400	1500	145×450	100	0-30	5-8	7.5	0.9	844×942×878
Φ600×400	1000	295×450	100	0-35	10-12	18.5	1.03	1054×972×1117
Φ600×600	1000	295×570	100	0-35	12-18	45	2.14	1315×840×1501
Φ800×600	1000	350×570	120	0-45	20-25	55	2.45	1515×2586×1040
Φ800×800	1000	350×850	120	0-45	35-45	55	3.05	1515×2831×1040
Φ1000×800	1000	580×850	200	0-45	25-40	110	6.5	3206×2210×1515
Φ1000×1000	1000	580×1060	200	0-45	40-80	132	7.6	3514×2230×1515
Φ1250×800	750	650×850	200	0-45	20-50	132	11.7	2630×1780×2050
Φ1250×1250	750	650×1330	200	0-45	90-110	185	13.2	2630×2180×2050
Φ1400×1400	750	1050×1540	250	0-45	120-170	280	17.2	2790×2800×2310
Φ1600×1600	600	1500×1785	350	0-60	220-280	450	22.8	3350×3120×2660

Any change of technical parameters, there is no further notice.