Regenerate asphalt mixing plant
Regenerate asphalt mixing plant solve various problems regarding the recycle of asphalt, environment protection and cost. Products of this series completely solve the key technical problems such as the drying drum sticking when the RAP is heated, the crushing and screening of RAP and discharging of harmful blue smoke.
Structure feature:
1. Equipped with ground proportioning hopper, the conveying speed of feeding belt conveyor is controlled by inverter and feeding amount is displayed on the control panel.
2. Heating of reclaimed material adopts hot blast for indirect heat-up to avoid asphalt aging during the heat-up of reclaimed material.
3. Set with multi-spot temperature test system, respectively monitor and control the temperature of hot blast, reclaimed material after heating and off gas.
4. Equipped with weighing system on the reclaimed material & hot material bin to facilitate the work management.
5. It realize automatic control of weighing of reclaimed material and supply of regenerated catalyst according to the preset proportion.
6. Regenerate mixing plant achieves auto operation in whole process through PLC communication with host computer.
7. When shut down the heating system of regenerate mixing plant, it can perform the cold regenerate mixing function. The additive proportion of reclaimed material should be reduced by 15%.
|
Model |
Rated capacity (t/h) |
Power (kw) |
Measure Accuracy(Static)% |
Fuel consumption | ||
|
Asphalt |
Regenerated catalyst |
Aggregate |
||||
|
ZS600 |
45 |
220 |
± 0.20 |
± 0.2 |
± 0.5 |
Oil: ≤6.5kh/t
or
Coal: ≤15kg/t |
|
ZS800 |
60 |
240 |
± 0. 20 |
± 0.2 |
± 0.5 | |
|
ZS1000 |
80 |
300 |
± 0.20 |
± 0.2 |
± 0.5 | |
|
ZS1200 |
100 |
320 |
± 0.25 |
± 0.2 |
± 0.5 | |
|
ZS1500 |
120 |
360 |
± 0.25 |
± 0.2 |
± 0.5 | |
Remark:
1. The moisture of reclaimed material should be strictly controlled lower than 3%.
2. Granule diameter should be controlled between 5mm and 30mm.