Usage: | Tensile Testing Machine |
---|---|
Power: | 0 |
Model Number: | TN11298 |
Brand Name: | TONNY |
Place of Origin: | China (Mainland) |
testing experter: | TONNY YANG |
WEB: | www.tomy.org.cn |
Quick Details
Specifications
TN11298 Button Pull Tester / SafQ Snap Tester/
Fastener Pull Test Stand
Introduction:
To determine the holding or breaking strength of prong-ring attached snap fasteners onto garments. Consists of an Upper Snap Clamp, a Lower Fabric Clamp &
Force Gauge mounted on a Stand.
The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric
Clamp. By turning the Top Flywheel, the operator can apply a specific force and the holding force or the
breaking strength can be recorded.Capability can be enhanced with clamps & accessories for testing of
other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué,
Toggles, Hooks/Bars,and D-Rings,amongstothers.
The detachment of a snap or other part may be classed as small parts; whilst broken small parts may
require sharp point & sharp edge testing. As a result, additional testing equipment may be recommended,
such as:
Small PartsCylinder
Sharp Point Tester
Sharp Edge Tester
Button Impact Tester
Dimensions : 280*230 *735 mm
Gross Weight:45 kg
Includes:
Item |
Used for |
The base |
Used to install the tension gauge, fixture and fixed sample and test operation |
30kg Imada Force Gauge, FB-30K |
Displaying the force value |
Calibration Weight(15 lbs) |
Calibrating the accuracy of the force value |
Lower Fabric Clamp,Level Arm Locking |
Used to grip the different sizes of buttons |
Long Nose Vise Grip |
Used for holding small decorations, such as retaining ring |
Three Pronged Clamp |
Can adjust Jaw size, suitable for different sizes of buttons decorations.Generally used for test ing button with four holes or jeans button |
Stainless steel surface tension clamp |
Testing different sizes of buttons decorations |
Upper Snap Clamp |
Testing Concave buttons with five claws. |
Upper Stud Clamp (Optional) |
Testing the convex button with five claws |
Two jaw pliers(Optional) |
Can adjust Jaw size, suitable for different sizes of buttons decorations |
Seam tension clamp(Optional) |
Testing the seam `s pulling force |
Small Parts Cylinder(Optional) |
used to determine whether toys & other articles intended for use by children under 3 years old present choking, aspiration, or ingestion hazards because of small parts. If any objects can fit completely into the cylinder without compressing & in any orientation, it is defined as a "Small Part". Its internal dimensions simulate the fully expanded throat of a child under 3 years old. |
Standards:
16 CFR 1500.51-53, ASTM WK4510 PS79-96,ASTM F963,EN71-Part1,M&S P115A