Performance Profile:
  "Long Brand" QQ-800 / QQ-801 Dual paper and tape the plastic is our factory technicians and Chemical Research Institute researchers, combined with years of experience in making plastic and absorb foreign advanced rubber formulations and manufacturing processes, selection of quality raw materials, by stringent process control of paper made from high-component polyurethane laminating adhesive, the plastic products with good initial tack, high peel strength and good adaptability to a variety of color printing paper and so on.

Plastic products posted brightness is good, soft, anti-aging characteristics, widely used in a variety of color printing of coated paper, offset paper, book paper and BOPP film version (PET film) and fit, and other materials, viscosity, etc. In addition to this plastic laminating adhesive to overcome the general, after a long storage time and color products, mildew and water poor shortcomings. Widely used in wine, port, calendars, books, letters and all kinds of high-grade paper, plastic packaging.

Product Index:

help:
  1. Using the ratio
Recommended ratio: QQ-801 (main agent): QQ-800 (curing agent) = 5:1, or configured according to specific circumstances.
  2. The work of concentration and configuration
Recommended concentration of 20-30%, when using this glue use of toluene or ethyl acetate solvent. Configuration concentration table:
Required concentration:

  3. Glue configuration
Will be called a good master agent concentration required to join toluene (ethyl acetate) and mix well, adding the curing agent, said, stir well, you are ready to use.
  4. Composite Technology
Use of complex machinery will work with the glue roller glue evenly printed on BOPP, the drying tunnel temperature regulation, to be solvent evaporation and then hot pressing the dry compound.

Mind matters:
  1. Compound should be dry when the color printing paper, film volatile dry solvent should be hot, or there will be blistering.
  2. Hot foil, should ensure that there are some hot roller temperature and greater pressure to ensure the greatest post-foil peel strength.
  3.BOPP bad film corona treatment or prolonged storage will result in decreased strength, BOPP film after corona treatment should reach more than 39 dyne.
  4. When using this glue, glue down after the removable tops should be kept tightly closed to prevent the oxidation of the primary thickening agent and curing agent sclerosis.
  5. Redeployment good glue should be used within 12 hours, the temperature is low to use variable length of 1-2 days.
  6. Work sites should maintain good ventilation in order to exclude volatile solvent.

Performance Profile:
  "Long Brand" QQ-800 / QQ-801 Dual paper and tape the plastic is our factory technicians and Chemical Research Institute researchers, combined with years of experience in making plastic and absorb foreign advanced rubber formulations and manufacturing processes, selection of quality raw materials, by stringent process control of paper made from high-component polyurethane laminating adhesive, the plastic products with good initial tack, high peel strength and good adaptability to a variety of color printing paper and so on. Plastic products posted brightness is good, soft, anti-aging characteristics, widely used in a variety of color printing of coated paper, offset paper, book paper and BOPP film version (PET film) and fit, and other materials, viscosity, etc. In addition to this plastic laminating adhesive to overcome the general, after a long storage time and color products, mildew and water poor shortcomings. Widely used in wine, port, calendars, books, letters and all kinds of high-grade paper, plastic packaging.

Product Index:

help:
  1. Using the ratio
Recommended ratio: QQ-801 (main agent): QQ-800 (curing agent) = 5:1, or configured according to specific circumstances.
  2. The work of concentration and configuration
Recommended concentration of 20-30%, when using this glue use of toluene or ethyl acetate solvent. Configuration concentration table:
Required concentration:

  3. Glue configuration
Will be called a good master agent concentration required to join toluene (ethyl acetate) and mix well, adding the curing agent, said, stir well, you are ready to use.
  4. Composite Technology
Use of complex machinery will work with the glue roller glue evenly printed on BOPP, the drying tunnel temperature regulation, to be solvent evaporation and then hot pressing the dry compound.

Mind matters:
  1. Compound should be dry when the color printing paper, film volatile dry solvent should be hot, or there will be blistering.
  2. Hot foil, should ensure that there are some hot roller temperature and greater pressure to ensure the greatest post-foil peel strength.
  3.BOPP bad film corona treatment or prolonged storage will result in decreased strength, BOPP film after corona treatment should reach more than 39 dyne.
  4. When using this glue, glue down after the removable tops should be kept tightly closed to prevent the oxidation of the primary thickening agent and curing agent sclerosis.
  5. Redeployment good glue should be used within 12 hours, the temperature is low to use variable length of 1-2 days.
  6. Work sites should maintain good ventilation in order to exclude volatile solvent.