PU gloss black topcoat (DP80700) Product’s name: PU gloss black topcoat
Product’s Numbers: DP80700 Application: Apply to gloss black wooden furniture.
Properties: 1. Good hardness, rich, good hiding power.
2. Excellent mirror effect, high gloss.
Recommended ratio:
Paint : DPR80 (curing agent): thinner = 100:80:80
The drying time:
Touch dry: ≤60Minutes, Hard dry : ≤48hours Pot life: ≤4Hours (25 ℃) Viscosity: 8-12 seconds ( Iwata Cup 2),
Coating mode: Spraying, brush Coating conditions: Recommended PU topcoat thinners in different temperature:
| Product name |
PU winter topcoat thinner |
PU summer topcoat thinner | ||
| Product Numbers | DPX8100 | DX8600 | DX303 | DX303C |
| Applicable temperature (℃), | ≤10 | 10~20 | 20~30 | ≥30 |
Note: To achieve the best effect, choose the thinner accounting to the actual demands.
Application process: surface preparation → sealer → spray stain → PU primer sealer → PE/PU transparent primer →PU black gloss black topcoat
Note:
1. Mix on recommended ratio. Use recommended products of Doit in order to have the best performance. Don’t risk mixing other brand’s products.
2. Stir thoroughly before applying and then set for a few minutes, Close container after each use.
3. Stir frequently during use to prevent settling.
4. Wash painting tool immediately after each use, in order to avoid damage.
5. Sanding each coat thoroughly without any shiny or lustrous spots before painting, lest causing poor adhesion.
Package and storage:
The paint shall be stored in a 4kg or 20kg metal can in a shady, cool, dry and ventilated place, avoiding rain, high temperature and fire with a shelf life of 12 months.
Tips & Warnings:
- This product is fire hazardous, please pay attention to fire prevention.
- Apply with adequate ventilation.
- Avoid of contact with skin and eyes. Rinse with clean water and get treatment immediately.
- Keep out of reach of children.
Note: The above information is based on our current knowledge and experience. To get the best effects, please modify the data according to the practical demands.
The company's products are in line with HG/T 3608-1999 polyester Polyurethane coatings for woodenware.