Key Specifications/Special Features: |
-
SL-FR5050RGB60-i is a flexible 12mm copper strip. Available in lengths from 0.5meter to 5meters, it may be cut every 5 centimeters. It uses 60pcs of SMD5050 RGB top LEDs per meter and consumes only 10 watts per meter @12VDC. It is easy to install with 3M sitcky back tape on the backside or may be secured with screw in mounting clips (order separately). It Works with a 12VDC power supply in combination with an RGB (dimming) controller. Can also be controlled with any DMX controller by connecting to a DMX decoder(order separately). Maximum length before re-feeding 5 meters, comes with low voltage 10-15cm feed end wire, standard roll 5 meters. Rated IP20 for indoor use only.
-
-
Applications:Indoor decorative lighting.
-
Under/above cabinet, cove lighting or accent toe kicks.
-
Art & sculpture and cove lighting
-
Replacement for conventional lighting system for back lighting
-
LEDs: 60pcs SMD5050 RGB top LEDs per meter
-
RGB LEDs with 3 chipsets inside
-
40,000 hours with 70% lighting output
-
-
General Characteristic:
-
*Power Consumption : 50W (Standard 5m roll)
-
*Operating power : DC 12V (DC 24V Version is also available upon request)
-
*Maximum length in serial : 5 meters
-
*Operating Temperature: -20 °C ~ 50°C
-
*Operating Humidity: 10%~90%
-
*IP20 (For indoor use only)
-
*Viewing Angel: 120 °
-
*PCB : Flexible copper
-
*Every 5cm (every 3 LEDs) cuttable, Cutted sectiions can be reconnected by re-soldering or through easy connectors (order separately) or through mating connetors (order separately).
-
-
-
-
Key Features: Energy saving and environmental friendly
-
Solid-state, anti-vibration and easy installation
-
Long lifetime up to 40,000hours with 70% lighting output
-
Multi-chip High Brightness SMD LED Technology
|