FOXB Series Temperature Controller is a universal model controller. Different sensor inputs such as RTD and TC are free to change with the controller, which brings much convenience to users. The well designed software, high quality components and elegant workmanship also provide customers perfect using experience. It is widely used in plastic, biology engineering, metallurgy, packing, chemical and boiler products and industry.
General Electrical Data
|
Rated voltage |
180V AC~240V AC |
|
Power consumption |
< =5VA |
|
Insulation Strength |
Power supply- input1500V AC 1min Input-relay output1500V AC 1min Power supply-relay output1500V AC 1min |
|
Insulation Resistance |
Input-relay output> 20MW Input-power supply> 20MW Power supply-relay output> 20MW |
|
Working Environment |
Ambient temperature0°C ~50°C Relative humidity35%~85%no condensation |
Measuring Data
|
Input sensor |
TC < =100 ohm; RTD< =5 ohm per each conductor |
|||
|
Measuring range |
K: (-100 ~1200) E: (-50 ~600) J: (-100~800) PT100: (-100-500) Cu50: (-50 ~150) |
|||
|
K(-50. 0~150. 0)E(-50. 0~150. 0)J(-50. 0~100. 0)PT100(-50. 0~100. 0)Cu50(-50. 0 ~150. 0) |
||||
|
Input type |
KEJ |
PT100Cu50 |
||
|
Display Accuracy |
0. 1 |
1 |
0. 1 |
1 |
|
tolerance |
±0. 5%FS |
±1%FS |
±0. 5%FS |
±1%FS |
FOXB - 1 2 3 4
|
SN |
Name |
Explanation |
|
(1) |
Outer Dimension (mm) |
A: 48mm×48mm×85mm B: 48mm×96mm×82mm C: 96mm×48mm×82mm D: 72mm×72mm×82mm E: 96mm×96mm×82mm |
|
(2) |
Power supply type |
1: Linear power supply 2: Switching power supply |
|
(3) |
OUT1 output type |
1: relay contact switch output(customize NO contact ) 2: logic level output (used to control SSR) 3: single-phase SCR zero-crossing trigger output(to control thyristor) 4: 4~20mA output 5: 0~5V output 6: 0~10V output 7: phase-shift trigger SCR 8: 0~10mA output |
|
(4) |
OUT2/ALM output type |
0: No output 1: relay contact switch output 2: logic level output (used to control SSR) |
Specification code: - 1 2 3 4 5
|
SN |
Name |
Explanation |
|
(1) |
OUT1 control methods |
1: PID auto-tuning and fuzzy control 2: Step control |
|
(2) |
OUT2/ALM control methods |
0: no alarm 1: upper limit alarm 2: lower limit alarm 3: lower/upper limit alarm 4: lower limit upward alarm 5: lower limit downward alarm (keep) |
|
(3) |
Input type |
1: K 2: E 3: J 4: Pt100 5: Cu50 |
|
(4) |
Upper limit of measuring range |
1: 100 2: 150 3: 400 4: 600 5: 800 6: 1000 7: 1200 |
|
(5) |
Display accuracy |
0: 1 1: 0. 1 |