The VLF testers (Generator) are suitable for
testing cables, transformers, switchgear,
rotating machinery, and other
electrical apparatus.
Load Ratings
VLF ADVANTAGES:
· Easiest to use Fully automatic microcontroller
· Built-in printer
· True sine wave output
· Real-time display of actual output waveform
· Ergonomic, menu guided, large backlit LCD
· Storage of test results for later retrieval and print.
· Over voltage and current protected
· Variable frequency 0.1Hz, 0.05Hz, 0.02 Hz
· Data of current, voltage and waveform directly sampled at HV side.
· AC testing does not degrade good cable insulation
· Harmful space charges are not injected into the cable insulation
· No traveling waves are generated during testing
· Rugged and reliable design less prone to failure from transients
SPECIFICATIONS
General:
|
Input
|
: 220 ± 10% Volts AC, 50 Hz
|
|
Output-Voltage AC
|
: 30kV / 40kv
|
|
Output frequency
|
: 0.1Hz, 0.05Hz, 0.02Hz.
|
|
Stability of frequency
|
: Fluctuation < 0.5%
|
|
Measurement accuracy
|
: ±3%.
|
|
Positive and negative voltage peak errors
|
: ≤3%.
|
|
Voltage waveform distortion
|
: ≤5%
|
|
Protection
|
: Mains fuse.
Over voltage protection.
Over current protection.
Protective HV resistor connected inside.
|
|
Construction
|
: temperature Indoor and outdoor : -10°C to + 40ºC.
Humidity:≤85%
|
|
Ambient conditions of use
|
: 1) Cable for mains supply: 1 number.
2) Interconnecting cable: 1 number.
3) H.V. Test lead: 1 pair.
4) Discharge rod: 1 number.
5) Operating manual: 1 number.
|
Load Ratings
|
Type no.
|
Frequency/Capacity
|
Rated Test Voltage/Current/Capacitance
|
|
VLF-30/1.1
|
0.1 Hz, ≤1.1µF
0.05Hz, ≤2.2µF
0.02Hz, ≤5.5µF
|
30kV/20mA
Test capacity:Up to10KV cable or generator
0.1Hz@1.1uF: up to 5KM of cable.
|
|
VLF-40/1.1
|
0.1 Hz, ≤1.1µF
0.05Hz, ≤2.2µF
0.02Hz, ≤5.5µF
|
40KV/ 25mA
Test capacity:up to 13.8KV cable or generator
0.1Hz@1.1uF: up to 5KM of cable.
|
|
VLF-50/1.1
|
0.1 Hz, ≤1.1µF
0.05Hz, ≤2.2µF
0.02Hz, ≤5.5µF
|
50KV/30mA
Test capacity: 15.75KV cable or generator
0.1Hz@1.1uF: up to 5KM of cable.
|
|
VLF-60/1.1
|
0.1 Hz, ≤1.1µF
0.05Hz, ≤2.2µF
0.02Hz, ≤5.5µF
|
60KV/37mA
Test capacity:18KV cable or generator
0.1Hz@1.1uF: up to 5KM of cable.
|
|
VLF-70/0.5
|
0.1 Hz, ≤0.5µF
0.05Hz, ≤1.0µF
0.02Hz, ≤2.5µF
|
70KV/40mA
Test capacity:25KV cable or generator
0.1Hz@1.1uF: up to 5KM of cable.
|
|
VLF-80/0.5
|
0.1 Hz, ≤0.5µF
0.05Hz, ≤1.0µF
0.02Hz, ≤2.5µF
|
80kV/50mA
Test capacity:up to 35KV cable or generator
0.1Hz@1.1uF: up to 5KM of cable.
|