Product Main

Specifications

Introduction:
MSAP1600 is a kind of local  aggregation device, supports optical transmission, video, protocol conversion and other services. This device is chassis structure with vertical cards, provides 17* general service slots, 1* exchange aggregation slot and 2* power supply slots. SLOT-9 is gigabit Ethernet slot, it can only insert gigabit Ethernet card. Power supply slot can only insert PWU-AC/DC card, the others like 1~8 channel, 10~18 channel SLOT support mixed insert service cards, networking card and other service cards can insert in any slot.
 
Main Features:
   Dual power supply back-up;
   Provide 17* service slots;
   Support mixed insertion of multi service cards;
   Separate service card & interface adapter card, easy to maintain;
   Perfect networking function.
 
Technical Parameters:
E1 Interface  
1. Nominal Speed: 2048Kbps, Tolerance ±50ppm
2. Code Type: HDB3
3. Interface Impedance and Connector: 75Ω/BNC or 120Ω/RJ45
4. Digital Interface Electrical Specification: Comply with ITU-T G.703 propose
5. Jitter Performance: Comply with ITU-T G.823 propose
6. Level: ±2.37V±10% or ±3.00V±10%
 
Ethernet Interface
1. Comply with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX and 100Base-FX
2. Support full duplex IEEE802.3X flow control, half duplex back pressure flow control
3. Interface Speed Rate: 10/100Base-Tx, 10M or 100M
4. Support Broadcast Storm Suppression
5. Support RJ45 interface direct connection/ cross line Auto-adaptation
6. ITU-T G.7041 Generic Framing Procedure
 
V.35 Interface  
1. Comply with ITU-T V.35 data transmission at 64 kbit/s using 60-108 kHz group band circuits.
2. Comply with ITU-T G.7041 Generic Framing Procedure (GFP).
 
Interface Lighting Protection  
1. Power Secondary Lighting Protection
2. E1, RJ45Interface SPD Prevent Surge
 
Optic Interface  
1. Transmitting Optic Power: Single Mode ≥-15 dBm
2. Receiving Sensitivity: Single Mode ≤-36 dBm
3. Fiber Interface: Dual SC Mode / Dual FC Mode / Single SC Mode is optional
4. Applicable Fiber: Single Mode or Multi Mode

 Power Supply Condition  
1. DC Power Supply Voltage: -48VDC, Tolerance Range: -24V~-72V
2. DC Power Supply Voltage: +24VDC, Tolerance Range: +20V~+28V
3. AC Power Supply Voltage: 170V~270V
 
Working Environment  
1. Environment Temperature: 0~60℃    
2. Relative Humidity: ≤90%(35℃)
3. Atmospheric Pressure: 86-106Kpa
 
Dimension  
483×350×180 mm