Product Main

Specifications

This 85M Wallmount can provide the transmission of broadband data service via power line,
which are suitable for use in a wide range of both residential (in-home) and commercial (offices,
apartments, hotels, warehouses) network applications in which existing power lines can be utilized.
There is never any need to install new   wires. These adapters enable the effortless creation of a
high-speed network that supports video, voice and data.
u       Wallmount type and power voltage range of 85 to 265 VAC 50/60Hz
u       HomePlug 1.0.1 Turbo compliant
u       Support QAM 256/64/16/8, QPSK, BPSK, and ROBO modulation schemes.
u       Up to 85 Mbps data rate on the power line.
u       56-bit DES Link Encryption with key management for secure power line communications.
u       Windowed OFDM with noise mitigation based on patented line synchronization techniques
improves data integrity in noisy conditions.
u       Priority-based CSMA/CA channel access schemes maximize efficiency and throughput
u       Integrated Quality of Service (QoS) Enhancements
u       Supports IGMP managed multicast sessions
 
Application
u       Standard Definition (SD) video distribution
u       Higher data rate broadband sharing for power line LAN
u       Shared broadband internet access
u       TV over IP (IPTV) and Voice over Internet Protocol (VoIP)
 
Parameter Specification
System SPEC
Chipset
Intellon INT5500
Serial Flash
8Mbits
Firmware
Intellon 5500 with FW1.5/FW1.6/FW1.8
Feature and Technology SPEC
Protocol
HomePlug 1.01 Turbo /IEEE802.3/3x/3u
System Support
Windows 98SE,2000, ME, XP 32/64bit, Vista 32/64bit, Win7 32/64
PLC rate
85Mbps
Data Rate- TCP/UDP
30Mbps TCP; 40Mbps UDP
Modulation Band
4-21MHZ
Modulation Schemes
Supports 256/64/16/8-QAM,QPSK,BPSK and ROBO
Encryption
56-bit DES
Qos
Integrated Quality of Service(QOS) Enhancements
Work Mode
Priority based CSMA/CA
Multicast support
Supports IGMP V2
IPv6
Support
LEDs
Power:
Ethernet:Ethernet Link and Activity
Data: PLC Link and Activity
Power Socket
Support British, Euro, Japan, US and China power connector
Ethernet Interface
1x RJ45 for 10/100M Ethernet(Auto MDI/MDI-X)
Consumption
2.5W
Environment Requirement
Operating Temperature
0º to 45º C
Storage Temperature
-20º to 70º C
Operating Humidity
10% to 90% Non-condensing
Storage Humidity
5% to 90% Non-Condensing
Input Rating
100-240 VAC, 50/60HZ
EMC and Safety
Regulatory Compliance
FCC part 15 Class B CE
Safety Regulations
UL
Green Standard
RoHS
Physical Dimension
Physical Characteristics
L×W×H: 82mm*52mm*32mm