Introduction:

MUX-A10F Centralized PCM Multiplexing Device is a centralized chassis and card-insertion structure, provides up to 14 service slots and 2 double power supply redundancy back-up slots, thus users can flexibly configure cards per demands.
 

Main Feature:

 Adopt Large Scale Integrated Chip; simple circuit, low power consumption and high reliability;

 Provide 16 slots, including 13 service slots, 1 main control aggregation slot and 2 power supply slots;

 Provide 2 power supply slots, support double power supply back-up;

 Double power supply can provide 2 channels DC 220V power supply back-up, 2 channels AC -48V power supply back-up;

 Easy to install and maintain;

 Provide powerful network management system;

 Adapt to various power supply environment -48VDC or 220VAC;
 

Technical Parameter:

 Optical Interface  

1. Transmitting Optic Power: –8dBm ～–15dBm

2. Receiving Sensitivity: ≤ –36dBm

3. Fiber Connector: SC, FC is optional

4. Adaptive fiber: Single mode 1310nm or multi-mode fiber is optional

5. Optical Channel Code Type: 1B1H

6. Optical Module: Single of double fiber is optional

7. Transmission Distance:  Normal 20Km (the farthest can be up to 120Km)
 

1. Interface: 10/100Base-Tx;

2. Interface Regulation: Comply with IEEE-802.3u standard;

3. Interface Speed Rate: Line speed 100Mbit/s;

4. Port mode: 10/100M self-adaptation;

5. Connector mode: RJ-45;

6. Adaptive Card: MA1-OPE-4/8/16(100M Ethernet)
 

1. Interface: 10Base-T;

2. Interface Regulation: Comply with IEEE-802.3 standard;

3. Connector mode: RJ-45;

4. Based Protocol: TCP/IP;
 

1. Interface Mode: Auto (FXS), Switch (FXO), Magneto (RD), E/M (4W)

2. Voice Sample Frequency: 8 KHz

3. Audio Interface Index:

    a. Impedance Specification: 600Ω balanced (2 wire/4 wire)

    b. Level:

        4 wire audio input level: -5dBr          Allowed Tolerance ±1dB

        4 wire audio output level: -5dBr         Allowed Tolerance ±1dB

        2 wire audio transmit level: 0dBr        Allowed Tolerance ±1dB

        2 wire audio receive level: -3dBr        Allowed Tolerance ±1dB

    c. Audio Switching Point Impedance Reflection Attenuation:

        2 wire: bp≥12dB (300~600Hz)

                     bp≥15dB (600~3400Hz)

       4 wire transmit: bp≥20dB (300~3400Hz)

       4 wire receive:   bp≥20dB (300~3400Hz)

   d. Net Attenuation Frequency Specification: Comply with ITU-T propose                

   e. Idle Voice Channel Noise: not over -65dBm0p

   f. Inter-channel Crosstalk: not over -65dBm0

   g. Amplitude Specification: Comply with ITU-T propose

   h. Total Distortion:   Comply with ITU-T propose
 

1. Voltage: AC: AC220V  AC 180V～250V;

                    DC: DC-48V  DC -36V～-72V;

2. Power Consumption: each card ≤5W;

3. Full Configuration Power Consumption: ≤100W;
 

1. Working Temperature: 0℃ ～ +50℃;

2. Storage Temperature: -40℃ ～ +70℃;

3. Relaive Humidity: 5% ～ 95% non condesing;

4. Atmospheric Pressure: 86 ～ 106Kpa;
 

19-inch standard chassis 483×350×180 mm