Introduction:

ELAN400 PDH Optical Multiplexer is a kind of optic transmission device support multi E1 interface/V.35 interface/Ethernet interface; apply to small capacity switch networking, users’ ring networking, mobile communication (base station), private network, DDN network, etc.

 

Main Feature:

    1 Two general service slots, support multi service module (Hot Pluggable), on-demand configuration and expansion;

    2 System total capacity: 4* E1 digital path interface (2+2);

    3 Each slot can support 2*E1, or 2*V.35, or 2*RJ45(2~4M bandwidth)card;
    4 Matching function: Dual power supply back-up;

    5 Support home terminal device power failure alarm function;

    6 Provide 1* RS232 asynchronous data interface;

    7 Provide 1* management interface, can achieve centralized monitoring and support system upgrade;

    8 Provide loop-back switch, support local and remote loop-back function;

    9  Adopting large scale chip, simple circuit, low power consumption, high reliability;

   10 Adapt to multi power supply environment -48VDC, +24VDC or 220VAC;

   11 Standard 19"1U chassis, small volume, light weight, working stably and reliably, easy to install.
 

1. Nominal Speed Rate: 2048Kbps, Tolerance ±50ppm

3. Interface Impedance: 75Ω(unbalanced)or 120Ω(balanced)is optional

4. Digital Interface Electrical Specification: Comply with ITU-TG.703 propose, Pulse waveform comply with sample as Pictue8.1

5. Jitter Characteristic: Comply with ITU-TG.823 propose

6. Input Jitter Tolerance: Comply with ITU-TG.823 propose

7. Output Jitter: Comply with ITU-TG.823 propose

8. Level: ±2.37V±10% or ±3.00V±10%

9. Interface Connector is: BNC Coaxial Mount or RJ-45 Crystal Head
 

1. Single Mode Transmitting Optical Power: -3dBm ~ -9dBm

2. Single Mode Receiver Sensitivity: -33dBm ~ -40dBm

3. Fiber Connector: Dual SC/Dual FC/Single SC is optional;

4. Applicable Fiber: Single mode, Multi mode.
 
Management Interface and Expansion Serial Port Specification

1. Connector: RS-232

2. Interface Level: RS-232 level

3. Interface Connector: RJ-45

4. Management Interface Baud Rate: 57600bit/s
 

1. DC Power Supply Voltage: -48VDC, Tolerance Range -24V~-72V

2. DC Power Supply Voltage: +24VDC, Tolerance Range +20V~+28V

3. AC Power Supply Voltage: 170V~270V

4. Power Consumption: ≤ 10W
 

1. Environment Temperature: 0~60℃    

2. Relative Humidity: ≤90%(35℃)

3. Atmospheric Pressure: 86-106Kpa
 

 483×270×45 mm(Standard 19" 1U)