A60E Optic Fiber Modem is a kind of optic transmission device consists with Extra Large Scale Integration as the core, it has 1 channel E1 and 2 channels Ethernet interface. Apply to data network which is based on E1 interface. A60E Fiber Optic Modem can also provide centralized chassis structure and comprehensive network management function.

 

Main Feature:

 Provide 1* E1 digital interface, and also support impedance 75Ω and 120Ω;

 4* 10/100M Base-T ports, effective bandwidth is 2M;

 Ethernet interface supports 10/100M full duplex, half duplex, and support Auto-negotiation system;

Ethernet interface supports local switching and VLAN function;

 Support Ethernet frame transparent transmission;

 Support local device power failure alarm function;

 Provide 1* management interface, can achieve centralized monitoring and support system upgrading.

 Adopt large scale chip, simple circuit, low consumption, high reliability;

Small size, light weight, working stably and reliably, convenient installation.
 

Technical Parameter:
 

 1. Single mode transmitting optic power: -3dBm ~ -9dBm

 2. Single mode receive sensitivity: -33dBm ~ -40dBm

 3. Fiber connector: dual SC/dual FC/single SC is optional;

 4. Adaptive fiber: single mode, multi mode.
 

1. Connecting Type: RS-232;

2. Connector level: RS-232 level;

3. Interface Connector: RJ-45;

4. Management Interface Baud Rate: 57600bit/s;

5. Extension Serial Port Maximum Baud Rate: 115200bit/s.
 

1. Nominal Speed Rate: 2048Kbps, Tolerance ±50ppm

2. Code Type: HDB₃

3. Interface Impedance: 75Ω(unbalanced)or 120Ω(balanced)is optional

4. Digital Interface Electrical Specification: Comply with ITU-TG.703 proposeJitter 
5.  Characteristic: Comply with ITU-TG.823 propose

6. Input Jitter Tolerance: Comply with ITU-TG.823 propose

7. Output Jitter: Comply with ITU-TG.823 propose

8. Level: ±2.37V±10% or ±3.00V±10%

9. Interface Connector: BNC Coaxial Mount.
 

1. Provide 4* RJ45 electronic interfaces, support local switching;

2. Comply with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX and 100Base-FX

3. Support VLAN function

4. Support full duplex IEEE802.3X flow control, half duplex back pressure flow control
5. Interface Speed Rate: 10/100Base-Tx, 10M or 100M

6. Support Broadcast Storm Suppression

7. Support RJ45 interface direct connection/cross line auto-adaptation
8. Effective bandwidth: 2M
 

1. DC Power Voltage: +24VDC, Tolerance Range +20V~28V, Power Supply Ripple: ≤120mVp-p

2. DC Power Voltage: -48VDC, Tolerance Range -24V~72V, Power Supply Ripple: ≤240mVp-p

3. AC Power Voltage: 220VAC, Tolerance Range 170V~270V , 50Hz
4. Power Consumption: ≤ 10W
 

1. Environment Temperature: 0~60℃    

2. Relative Humidity: ≤90%(35℃)

3. Atmospheric Pressure : 86-106Kpa
 

210mm*140mm*44.5mm(desktop), can be installed in standard 19” rack.