Product Description
AB-D6018KIH-64 center 20U plug- in fiber optic is generally installed in the control center for centralized installation of the receiver, and it is usually composed by plug-in chassis, plug-in card reception functional module and plug-in card reception interface module.
Fixed ears are designed on both sides of 20U plug-in chassis , which can be installed in a standard 19-inch rack. Plug-in cards in chassis are divided into two parts- before and after parts, and the first part is functional plug-in card module, the latter part is functional interface module. Chassis provides card modules slots for four-level fiber optics, and 16 slots fiber optics installation positions for power modules and installation position of 17 slots fiber Optics card modules is proivded. These plug-in modules of different slots can be installed in the chassis with any kind of combination. Chassis provides duaplicate supply hot backup. Configurated with network management and mobile phone SIM card module, system events can be conveyed to device managers via wired / wireless ways. Video output has built-in distribution functions, which can achieve double output by BNC or special video winding placement, so that to connect matrix seamlessly. High-density structure design, achieving large number of system configuration with very few chassises; with many characteristics, such as variey of module function, flexible interface, plug and play, unlimited location module card, flexible and simple installation and so on.
AB-D6018KIH-64 center 20U plug- in fiber optic is generally installed in the control center for centralized installation of the receiver, and it is usually composed by plug-in chassis, plug-in card reception functional module and plug-in card reception interface module.
Fixed ears are designed on both sides of 20U plug-in chassis , which can be installed in a standard 19-inch rack. Plug-in cards in chassis are divided into two parts- before and after parts, and the first part is functional plug-in card module, the latter part is functional interface module. Chassis provides card modules slots for four-level fiber optics, and 16 slots fiber optics installation positions for power modules and installation position of 17 slots fiber Optics card modules is proivded. These plug-in modules of different slots can be installed in the chassis with any kind of combination. Chassis provides duaplicate supply hot backup. Configurated with network management and mobile phone SIM card module, system events can be conveyed to device managers via wired / wireless ways. Video output has built-in distribution functions, which can achieve double output by BNC or special video winding placement, so that to connect matrix seamlessly. High-density structure design, achieving large number of system configuration with very few chassises; with many characteristics, such as variey of module function, flexible interface, plug and play, unlimited location module card, flexible and simple installation and so on.
Product features:
1. 64-bit module into the slot
2. intelligent IP network management functions
3. Wireless SMS Alarm function
4. support built-in dual power supply backup
5. support BNC, video cable ring access dual-output
6. supports data bus sharing
5. support BNC, video cable ring access dual-output
6. supports data bus sharing
7. support module optical bridge technology, bus motherboard function
Module Introduction
Video ring connected modules:
A video loop access module is equipped on the above corresponding location of rear panel for each rack , and it can output all videos in16 slots through video output access module (up to 64 channels ), and the output form is as following:
Loop 1-16 is the first channel video for each functional module;
Loop 17-32 is the second channel video for each functional module;
Loop 33-48 is the third channel video for each functional module;
Loop 49-64 is the fourth channel video for each functional module.
Note:
Video ring connected modules:
A video loop access module is equipped on the above corresponding location of rear panel for each rack , and it can output all videos in16 slots through video output access module (up to 64 channels ), and the output form is as following:
Loop 1-16 is the first channel video for each functional module;
Loop 17-32 is the second channel video for each functional module;
Loop 33-48 is the third channel video for each functional module;
Loop 49-64 is the fourth channel video for each functional module.
Note:
1. 20 U chassis is up to 256-channel video loop at the output.
2. the chassis side panel is designed by built-in video distribution function, which can output not only from functional Interface Module BNC but also from the chassis video loop side panel.
3. when all is the 1channel video, LOOP17-32 is also the 1 video output for each functional module (video dual output function)
2. the chassis side panel is designed by built-in video distribution function, which can output not only from functional Interface Module BNC but also from the chassis video loop side panel.
3. when all is the 1channel video, LOOP17-32 is also the 1 video output for each functional module (video dual output function)