Features of PBC Relay
1. Extremely low cost.
2. SPDT configuration.
3. Standard PC layout.
4. Sealed version avaible.
Ordering information
Mini Relays (JRC-22F)
Mini Relays (JRC-22F)
| Mark demonstration | JRC-22F /12VDC-1ZS | |
| Type | JRC-22F | |
| Coil voltage | 1.5 3 5 6 9 12 24 VDC | |
| Contact Arrangement | 1Z: SPDT , 1H: SPST-NO | |
| Termination | NO:PCB | |
| Coil power | (NO) L : Standard(0.2W) , N: 0.36W , B: 0.45W | |
Contact Data
| Contact Arrangement | 1 Z (1C) 1H(1A) | |
| Initial Contact Resistance | 100mΩ (1A 24VDC) | |
| Contact Material | AgNi/Au | |
| Contact Rating(Res.Load) |
H:3A 120VAC/30VDC
Z :2A 220VAC/30VDC
3A 120VAV/24VDC
|
|
| Max.switching voltage | 220VAC/60VDC | |
| Max.switching curreng | 3A | |
| Max.switching power | 360VA / 72W | |
| Mechanical life | 1×107 times | |
| Electrical life | 1×105 times | |
Characteristics
| Initial Insulation Resistance | 1000MΩ 500VDC | ||
| Dielectric Strength | Between coil and Contacts | 1000VAC 1minute | |
| Between open contacts | 500VAC 1minute | ||
| Operate time(at nomi.Volt) | Max:10ms | ||
| Release time(at nomi.Volt) | Max:5ms | ||
| Temperature rise(voltage) | H:50℃ N.B:60℃ | ||
| Shock Resistance | stability | 98m/s2(10g) | |
| intensity | 980m/s2(100g) | ||
| Vibration Resistance | 1.5mm 10～55Hz | ||
| Humidity | 35%～85% | ||
| Temperature | -25℃～+55℃ | ||
| Termination | PCB | ||
| Unit weigth | 5g | ||
| Construction | Sealed IP67 And Guards against the solder | ||
Coil Data
| Nominal Voltage VDC | Action voltageVDC | Drop-out Voltage VDC | Max voltageVDC(25℃) | Coil Resistance Ω | ||
| L | N | B | ||||
| 3 | 2.3 | 0.3 | 3.9 | 45 | 25 | 20 |
| 5 | 3.8 | 0.5 | 6.5 | 120 | 70 | 56 |
| 6 | 4.5 | 0.6 | 7.8 | 180 | 100 | 80 |
| 9 | 6.8 | 0.9 | 11.7 | 400 | 220 | 180 |
| 12 | 9.0 | 1.2 | 15.6 | 700 | 400 | 320 |
| 24 | 18.0 | 2.4 | 31.2 | 2800 | 1600 | 1280 |