Product Main

Specifications

Product description:
AB70-95CPU Redundant Controller is an anxiliary equipment for AB80-60/80 series matrix switcher, which provides two AB80-60/80CPO external CPU connections. The redundant CPU comes to work while the main CPU is in failure, which ensures the matrix switch system operate normally and stably.
The two AB80-60/80CPO connected to AB70-95 actually operate synchronously,which can accept the keybaord command and alarm information etc. AB70-95 detects whether the main and resundant CPU are in failure.Only CPU1 provides control signal output in normal stautus. The CPU2 ouput is switched automatically while the system is in failure.
AB70-95 rear panel provides 3 groups of communication ports,and each group contains 8 RJ-45 connectors and one BNC high speed data line connector to connect CPU1, CPU2 and matrix system equipment respectively.AB70-95 judges whether the connected CPUs work properly by the detection for these ports. The RJ-45 connectors of group SYS are designed for keyboard, alarm interface unit and PC connection, however,the high speed data line is for matrix keyboard, matrix chassis and auxiliary equipment connection.
AB70-95 front panel provides 4 indicators classified into 2 CPU status indicators, one alarm indicator and one power indicator.When two AB80-60/80CPO is connected and work normally, the CPU1 and CPU2 will flash very two seconds. however,when any one of them is in failure, the corresponding indicator will turn normally light.The indicator will not turn on when high data line is not connected. When any of the CUP is in failure, the alarm indicator will turn light, 3 group of normally opened/closed relay contacts and the beeper will be actived.
Feature
1.19" standard chassis mount with a cable fixer
2.Power,CPU status and alarm indicators
3.2 synchronous CPU operation
4.Auto detecting and switching between main and redundant CPU
5.Operating CPU selectable manually
6.Connection with high speed data line
7.Being able to connect with AB80-60/80 matrix switcher
8.Being able to connect with 2 AB80-60/80CPO external CPUs
9.Relay output to control alarm equipment
Sepcification
Data Index
 
High Speed Data Line
RS-232 interface
Communication Parameter
1bit start, 9 bits data, 1 bit stop
Baud
38600B
Connection
BNC input/outpu loop
Keyboard Port Signal
RS-232 interface
Communication Parameter
1bit start, 8 bits data, 1bit stop
Baud
1200B, 2400B, 4800B, 9600B
Connection
RJ-45
Alarm relay
 
Contact Type
single polarity normally opened/closed contact
Relay Requirement
125VAC/0.6A or30V DC/2A
General Index
 
Power Requirement
230VAC, 50/60Hz
Power Consumption
8W
Dimension
89mm(H)×482mm(W)×195mm(D)
Weight
6Kg
Temperature
0℃-60℃
Huminity
0-95% noncondensing