HT-9711 Dynamic Fatigue Testing Machine Data Acquisition System Block Diagram Control Utility Specifications Model HT 9711-5 (Bench Top Type) HT 9711-5 (Floor Standing Type) HT 9711-10 HT 9711-25 • Power source Electro-Hydraulic Servo Control System • Force capacity kg 500 1000 2500 kN 5 10 25 • Max. Stroke (mm) (Static) ±50 (Dynamic) ±25 • Control mode (force, displacement control) • Static force sensor capacity x120%, x100%, x50%, x20%, x10% (Auto Gain selection) • Static force sensing error <=±1% (Auto Gain selection) • Dynamic force sensor capacity 100%, x50%, x20%, x10% • Dynamic force sensing error <=±1% (Calibration error) • style T type • Operating width (mm) 400 • Operating height (mm) 250~900 • Dimensions (WxDxH) (cm) 120 x 65 x 220 • Hydraulic power QR-10 QR-20 QR-40 QR-60 QR-80 QR-10 • Minimum flow rate (l/min) 10 10 40 60 80 10 • Servovalve rated flowrate (l/min) 15 15 45 80 120 15 • Displacement sensor 1 L (Option) 5L (Option) 1 L (Option) • Frequency range (LVDT built-in actuator);0.05~50Hz • Ramp Sine Triangular Square dimension, table, stroke, and capacity can be made to order depending on customer requirements Specifications Model HT 9711-50 HT 9711-100 HT 9711-200 HT 9711-300 HT 9711-500 • Power source Electro-Hydraulic Servo Control System • Force capacity kg 5000 10000 20000 30000 50000 kN 50 100 200 300 500 • Max. Stroke (mm) (Static) ±50 (Dynamic) ±25 • Control mode (force, displacement control) • Static force sensor capacity x120%, x100%, x50%, x20%, x10% (Auto Gain selection) • Static force sensing error <=±1% (Auto Gain selection) • Dynamic force sensor capacity 100%, x50%, x20%, x10% • Dynamic force sensing error <=±1% (Calibration error) • style E type D type • Operating width (mm) 530 750 • Operating height (mm) 250~900 250~1100 • Dimensions (WxDxH) (cm) • Hydraulic power QR-10 QR-20 QR-40 QR-60 QR-80 • Minimum flow rate (l/min) 10 20 40 60 80 • Servovalve rated flowrate (l/min) 15 30 45 80 120 • Displacement sensor 1 L (Option) 5 L (Option) • Frequency range (LVDT built-in actuator);0.05~50Hz • Ramp Sine Triangular Square dimension, table, stroke, and capacity can be made to order depending on customer requirements Standard Accessories Tensile for plane Tensile for round Compression Standard Accessories Hydraulic Grips Hungta Co.Ltd. Copyright ©2005 All rights reserved. Privacy Policy | Terms of Use | Site Requirements