|
Specifications |
|
Modle |
HT-2328, HT-2328BP, HT-2328BI
|
|
•
|
Capacity |
kN
|
2
|
1
|
0.5
|
0.2
|
0.1
|
|
Standard-accuracy type
|
Accuracy of test force is better than ±1% within the range 1/1~1/50 of full scale of load cell |
|
•
|
Measurement
of test force |
Load cell
|
HT-8336 High precision tension/compression load cell as standard (maximum force x 1set, with excellent expanding feature, available to connect some load cells at a time - optional) |
|
Load amplification
|
Type HT-2328 equipped with HUNG TA interface system, available with: (A,B select one)
(A) x1, x2, x5, x10, x20, x50, x100 seven scales with auto range function,resolution 1/2000
(B) x1, x2, x5, x10 four scales with auto range function, resolution 1/20000 |
Type HT-2328AP, HT-2328AI Equipped with HT-2010 control indicator, available with x1, x2, x5, x10
four scales with auto range function, resolution 1/20000 |
|
•
|
Test speed range (select one) |
A: Servo motor type: 0.005~1000 mm/min
(Suitable for HT-2328 only) |
B: Servo motor type: 0.05~1000 mm/min
(Suitable for HT-2328BP only) |
C: DC motor type : 10~500 mm/min
(Suitable for HT-2328BP only) |
D: DC motor type : 10~1000 mm/min
(Suitable for HT-2328BP only) |
|
E: DC motor type : 0.5~1000 mm/min
(Suitable for HT-2328 only)
|
|
F: DC motor type : 100~1000 mm/min |
|
•
|
Effective test depth |
125 mm (distance of clamping center to column side) |
|
•
|
Crosshead working table distance |
standard type: 750 mm / special type: 1150 mm |
|
•
|
Test stroke (equipped
with standard tensile grips) |
standard type: 560 mm / special type: 960 mm |
|
•
|
Over-travel &
Overload protection function |
Stroke up & down position protection setting, when test force exceeds 10% of full scale, system auto stop to protection the system from overloaded. |
|
•
|
Power |
Consumption
|
0.5 kVA |
|
Power source
|
1ø, 220 VAC, 50/60 Hz |
|
•
|
Dimensions |
Console (WxDxH)
|
standard type: 56x50x126 cm / special type: 56x50x166 cm |
|
Unit
|
100x48x42 cm (computer hardware + monitor + printer) |
|
•
|
Weight |
Console
|
standard type:54 kg / special type: 60 kg |
|
•
|
Standard accessories |
Tensile grips x 1set, tool kit x 1set, operation manual x 1set, certificate of calibration x 1set |
