1.             IV Set Management and Flow Rate Calibration

IV sets can be added, stored and deleted in memory, and easily used after calibration.

2.             Optional Infuse Rate Unit

d/min, mL/h and volume/time

3.             Infusion Mode

Drip-rate and volumetric

4.             Pumping Mechanism

Peristaltic finger pump

5.             IV Sets

Standard IV sets of 10, 15, 20 and 60d/mL, with diameter 3.4 ~ 4.5mm.

6.             Flow Rate Range

1.0 ~ 1200 mL/h

7.             Drip Rate Range

10 d/mL IV set: 1.0 ~ 200 d/min

15 d/mL IV set: 1.0 ~ 300 d/min

20 d/mL IV set: 1.0 ~ 400 d/min

60 d/mL IV set: 1.0 ~ 150 d/min

8.             Increment

From 0.1 mL/h to 99.9 mL/h, 0.1 mL increment; ≥100 mL/h, 1 mL increment.

9.             Flow Rate Accuracy

≤ ± 5% (after calibration)

10.        Drip Rate Accuracy

≤ ± 1.5%

11.        Volume Limit

1 ~ 9999 mL

12.        Volume Infused Display

0 ~ 9999 mL & >9999 mL

13.        Purge Rate

600 mL/h

14.        KVO Rate

1 mL/h

15.        Bolus Mode

Available for Bolus mode, flow rate adjustable.

16.        Occlusion Pressure

Pressure detection device with 8 sensitivities setting, 40 ~ 140KPa.

17.        Air-in-line Detection

Air bubble detected by ultrasonic and the device with 8 sensitivities setting, 50 ~ 1000μL.

18.        Alarm Volume

8 levels setting

19.        Anti-reverse Function

Anti-reverse function on motor to prevent upstream

20.        Self-check

Self-check when start up and during infusion

21.        Audio and Visual Alarms

Air-in-line, Door open, Occlusion, Infusion finished, Pause overtime, Leakage, Empty, Low battery, Battery damaged, etc.

22.        Display

Blue LCD with high brightness

23.        Power Source

AC: 100V ~ 240V, 50Hz/60Hz, ≤ 25VA

24.        Battery    

Rechargeable Ni-MH battery: DC12V, 2000mAh, life: ≥ 4 hours at 25mL/h

25.        Classification

Class Ⅱ, CF, IPX4

26.        Dimensions and N.W.

150mm x 150mm x 235mm; 2.3kg