· Vag commander 8.6
AVDI for vag update to 8.6,latest version
ABRITES Commander for VAG is a Windows PC based diagnostic software for the vehicles from
VAG. With the help of this tool you can perform operations with vehicles from the VAG group,
which are in most cases unsupported from the producer diagnostic testers. The ABRITES
Commander for VAG provides you also a full diagnostic capabilities for VAG-vehicles.
Highlights:
Extracting security access codes (PIN) by OBDII
Programming keys by OBDII. Preparation of dealer's keys.
Mileage recalibration by OBDII
Clearing crash data DTCs by OBDII
Read/Program flash memory of engine control units by OBDII. Options for resetting the number
of flashing attempts.
Exchange speed limit of MMI-TV system
Standard diagnostic functions:
Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO
transport protocol (CAN), KWP1281 or KWP2000 over K-Line
For all electronic control units reading identification data
For all electronic control units read error (DTCs)
For all electronic control units clear error (DTCs)
Scan all units
Broadcast requests
Measured values
Adaptation
Special functions:
Instrument CAN
- With this function you can establish diagnostic session with the Instrument cluster using
KWP2000 over TP2.0
- You can read current odometer value
- You can change odometer value
- Added support for VDO Instrument Cluster 2006+
- Read/Program memory of instrument cluster immobilizer
- Reading security access code of the IMMOBILIZER
- Reading security access code of the IMMOBILIZER
- Reading security code (PIN) and component protection by OBDII - VW CRAFTER
- Read/Write immobilizer related data
EZS - Kessy (Q7/A6/Allroad)
- With this function you can prepare dealer key/learn dealer key
- Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)
Instrument K-Line
- With this function you can establish disgnostic session with the Instrument cluster via K-Line
(KWP1281 or KWP2000)
- You can Read/Change odometer value
- Read PIN code
- Read/Write eeprom
- Read ROM/Flash from the Instrument cluster
Engine Control Unit
- Read EDC17/MED17 flash memory
- Read/Write of flash memory (EDC15, EDC16 all types Read/Write Flashmemory via OBDII (K
and CAN). Calculation of
checksums while programming, ME7.1.1, MED9.x, ME7.5)
- Read/Write flash counters (EDC16)
- Read/Write eeprom (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic
ME7.8.)
- Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17,
MED9.x, Simos PPD)
- Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16,
MED17.5.1, MED 9.x, Simos PPD)
- Enable/Disable immobilizer (EDC15, ME7.x, EDC16)
- Odometer correction (EDC15, EDC16)
Kessy adaptation
- This function can be used for adaptation of brand new kessy units to the car. This adaptation can
be by CAN TP2.0, K-KWP2000 and also can be used with Porsche Cayenne.
TV activation ED1/ED2
- Using this special function you can change speed limit of MMI compatible vehicles to change
speed where TV becomes OFF
Key learning
- With this function you can learn key/transponder to the vehicle
Dump tool
- With this function you can calculate security access codes, change odometer and so on from
EEPROM dump from the correcponding unit
Airbag
- With this special function you can Read/Write EEPROM memory of the airbag module
- Clear the crash data of the airbag module
Custom Read/Write
- Using this application you can read/program memory in some electronic control unit
PIN Convertor
Service interval
- Using this function you can perform reset of the service reminder, reset of the service interval
parameters or change service interval options
Remote control adaptation
- Using this application, you can learn remote controls
- Navigation
- - Using this application, you can enable/disable the !Eject!– button of the !Navigation!– syst
- Cruise control system
- - Using this application, you can activate/deactivate a cruise control system and change the related
- steering wheel electronics( SWE) configuration if SWE unit is available
- Brake pads change
- - Using this application, you can !Open rear parkig brake for pad change!–, !Close rear parkin
- brake!–, perform !Parking brake function test
LICENSE:
11 AN002 - KM-CAN
11 AN003 - PIN-CAN
11 AN004 - Immo panel
11 AN005 - Immo panel EDC16
11 AN006 - KM/PIN K-Line
11 AN008 - Flash Counters
11 AN009 - Key learning
11 AN010 - Airbag EEPROM
11 AN011 - TV Activation
11 AN012A- EDC16 Odometer
11 AN012B- EDC16 EEP/PIN/Immo-off
11 AN014 - EDC17 EEPROM
11 AN015 - Flash Memory ECU
11 AN016 - Dealer key learning
11 AN018 - Dealer key learning Q7
11 AN019 - Prepare Dealer Key Q7
11 AN021 - ME7 EEPROM by CAN
11 AN022 - CDC32xx Programmer
11 AN027 - Q7 2008+