| Standard or Nonstandard | American Standard |
| Structure | Regulating |
| Pressure | 1.6~6.4 |
| Power | Pneumatic |
| Material | Casting |
| Temperature of Media | -40~450 |
| Media | Gas,liquid,etc. |
| Port Size | 40~200(mm) |
| Place of Origin | Jiangsu, China (Mainland) |
| Model Number | HAC-150 |
| Brand Name | Zhongyuan |
| type(channel location) | 2 general formula |
| flow direction | undirectional |
| seal type | hard sealed |
Overview
HAC cage angle CV3000 series control valve is one of the products. HAC cage angle valve control various kinds of high temperature, low temperature high-pressure fluid is a pressure balanced control valve. Valve structure is compact, there is a balance to improve the flow of fluid around the sleeve diversion wing, so that the pressure drop is small, flow rate, adjustable wide. Flow characteristics and high precision. Dynamic stability control valve, low noise and small cavitation corrosion. Regulating valve leakage standards meet ANSI B16.104. Valve is equipped with multiple springs film and cylinder actuator, its compact structure, big output power. Products meet the GB/T4213-92 standards.
Type style: angle seat valve casting ball
Nominal Diameter: 40,50,65,80,100,150,200 mm
Nominal pressure: ANSI 125,150,300,600 JIS 10,16,20,30,40 K PN1.6, 4.0,6.4 MPa
Connection type: flange sealing surface type FF, RF, RJ, LG, MFM
Flange Standard: JIS B2201-1984, JB/T79.1-94 (PN1.6MPa), JB/T79.2-94 (PN4.0, 6.4MPa), ANSI B16.5-1981, HG20594-97, HG20618 -97, etc.
Welded Connections: embedded Welding of SW (40 ~ 50mm) butt welding BW (65 ~ 200mm)
Material: Steel (ZG230-450), cast stainless steel (ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, SCS16) LF4, titanium, etc.
On the valve cover: ambient temperature P -17 ~ +230 °C;
Elongation-I EI -45 ~ +566 °C;
Elongation-I EI -100 ~ -45 °C -196 ~ -100 °C
Note: The operating temperature must not exceed the permissible limits of various materials.
Gland Type: Bolt Clamp
Packing: V-type PTFE packing, asbestos packing impregnated with PTFE, asbestos braided packing, graphite packing
Spool type: Pressure balanced spool
Flow characteristics: high capacity flow characteristics - metal seal - such as the percentage of properties (% V) and linearity (LC)
Flow characteristics: high capacity flow characteristics - soft seal - such as the percentage of properties (% T) and linearity (LT)
Flow characteristics: High flow characteristics - metal seal - such as the percentage of properties (% VF) and linear features (LVF)
Flow characteristics: High flow characteristics - soft seal - such as the percentage of properties (% TF) and linear features (LTF)
Material: stainless steel (1Cr18Ni9Ti, 1Cr18Ni12Mo2Ti ,17-4PH, 9Cr18, 316L), stainless steel welding Secretary Mrs Lai alloys, titanium and corrosion-resistant alloys
Type: HA thin film multi-spring actuator, VA6 Single cylinder piston actuator, VP double acting piston actuator
Diaphragm materials: EPDM clip nylon clip nylon NBR
Spring range: 20 ~ 100,80 ~ 240KPa (HA type), 190 ~ 350,190 ~ 400KPa (VA6 type)
Supply pressure: 140 ~ 400KPa (HA type), 400 ~ 500KPa (VA6 type), 300 ~ 500KPa (VP type)
Air Source Interface: RC1 / 4 "(HA, VA6 type, RC3 / 8" (VP-type)
Ambient temperature: -30 ~ +70 °C
Positive effect or reaction with the implementing agencies to achieve the gas valve - Off-type or air - open
Locator (HEP-type, YT1000 type), air filter pressure reducer, to secure his position valve, limit switch, valve position transmitter, hand wheel institutions