Shining 200 LCD Digital Studio Flash Light
DESCRIPTIONS:
DESCRIPTIONS:
Features:
?Small Size - The volume is less than the size of a bottle of 2.0L Cola
?Light Weight - The net weight is only about 960g, easy to carry
?Fast Recycling - The recycling time is up to 0.3s when setting up the light output at 1:1
?Digital - Usd 2.0-inch large-screen LCD display, NC operation, the appearance is luxuriant, and the operation is at a glance
?Stable Color Temperature - In full power range, the basic color temperature is controled between 5500k ± 5%
?Full function - LCD luminous indication, buzzer tips, power output of 7 adjustable grade, multi-strobe, master/slave light setup, optical control
?Small Size - The volume is less than the size of a bottle of 2.0L Cola
?Light Weight - The net weight is only about 960g, easy to carry
?Fast Recycling - The recycling time is up to 0.3s when setting up the light output at 1:1
?Digital - Usd 2.0-inch large-screen LCD display, NC operation, the appearance is luxuriant, and the operation is at a glance
?Stable Color Temperature - In full power range, the basic color temperature is controled between 5500k ± 5%
?Full function - LCD luminous indication, buzzer tips, power output of 7 adjustable grade, multi-strobe, master/slave light setup, optical control
Important Notice:
◆ The light bulb is not suitable for lighting longly, for safety and heat dissipation, it's better to turn it off once every minute
◆ The lamp bulb is damageable, not included in warranty; if it's damaged during use, the bulb need to buy separately
◆ There are high voltage inside, do not disassemble it
◆ Power supply socket requires good grounding
◆ This product is not waterproof, do not use it in wet conditions
◆ When don't use the product for long, be sure to disconnect the power
HOW TO USE :
SPECIFICATIONS:
Product Weight: 1600g
Light Body Weight: 960g
Product Dimensions: 21.5 high × 10 wide (cm)
Maximum Power: 200W
Flash Index: 54GN
Basic Color Temperature: 5500k ± 5%
PACKAGE INCLUDING:
◆ The light bulb is not suitable for lighting longly, for safety and heat dissipation, it's better to turn it off once every minute
◆ The lamp bulb is damageable, not included in warranty; if it's damaged during use, the bulb need to buy separately
◆ There are high voltage inside, do not disassemble it
◆ Power supply socket requires good grounding
◆ This product is not waterproof, do not use it in wet conditions
◆ When don't use the product for long, be sure to disconnect the power
Exposure Index: (ISO100: 1m)
Output Ratio |
1/1
|
1/2
|
1/4
|
1/8
|
1/16
|
1/32
|
1/64
|
GN
F Value |
54
|
40
|
28
|
20
|
14
|
9
|
6
|
2.8
|
20m
|
14m
|
10m
|
7m
|
5m
|
3.5m
|
2.5m
|
4
|
14m
|
10m
|
7m
|
5m
|
3.5m
|
2.5m
|
1.7m
|
5.6
|
10m
|
7m
|
5m
|
3.5m
|
2.5m
|
1.7m
|
1.2m
|
8
|
7m
|
5m
|
3.5m
|
2.5m
|
1.7m
|
1.2m
|
0.8m
|
11
|
5m
|
3.5
|
2.5m
|
1.7m
|
1.2m
|
0.8m
|
0.6m
|
16
|
3.5m
|
2.5m
|
1.7m
|
1.2m
|
0.8m
|
0.5m
|
0.3m
|
? Insert the cable through the power connector, turn on the power switch to hear a beep, then LCD lights up, indicating power on (the light bulb can only light when the switch to the right);
? Press the "MENU" button to enter cycle function setup;
? Enter "MANUAL" mode, adjust the number key, and you can set up light output according to the environment, as detailed in the schedule. Each adjustment can achieve 1/2 gear precise fine-tuning, 7 grade of dimming;
? Enter "QUCK CONT " mode, adjust the number key, and you can set up frequency per second according to operational need. 5 times/sec and 15/2 seconds are optional, flash index is GN20;
? Enter "QUCK MULTI" mode, adjust the number key, and you can set up light output under 3 times/second state. 1/64, 1/32 and 1/16, three kinds of light output ratio are optional;
? Enter "SLOW " mode, there're 7 grade of dimming. In this mode, you can avoide the camera built-in flash TTL flashing so as to achieve the shutter and the strobe flash synchronization.
? To turn off the operation beep, simply to set up it by the "MENU" button.
? A "SLAVE" switch is at the top, and you can set up the studio light working state by this switch. When being off, the studio light is a master light (optically control other slave lights); when being on, the studio light is a lave light (can be controlled optically);
? Press the "MENU" button to enter cycle function setup;
? Enter "MANUAL" mode, adjust the number key, and you can set up light output according to the environment, as detailed in the schedule. Each adjustment can achieve 1/2 gear precise fine-tuning, 7 grade of dimming;
? Enter "QUCK CONT " mode, adjust the number key, and you can set up frequency per second according to operational need. 5 times/sec and 15/2 seconds are optional, flash index is GN20;
? Enter "QUCK MULTI" mode, adjust the number key, and you can set up light output under 3 times/second state. 1/64, 1/32 and 1/16, three kinds of light output ratio are optional;
? Enter "SLOW " mode, there're 7 grade of dimming. In this mode, you can avoide the camera built-in flash TTL flashing so as to achieve the shutter and the strobe flash synchronization.
? To turn off the operation beep, simply to set up it by the "MENU" button.
? A "SLAVE" switch is at the top, and you can set up the studio light working state by this switch. When being off, the studio light is a master light (optically control other slave lights); when being on, the studio light is a lave light (can be controlled optically);
SPECIFICATIONS:
Product Weight: 1600g
Light Body Weight: 960g
Product Dimensions: 21.5 high × 10 wide (cm)
Maximum Power: 200W
Flash Index: 54GN
Basic Color Temperature: 5500k ± 5%
PACKAGE INCLUDING:
Shining 200 LCD flash lamp body × 1
Lamp Shade × 1
Lamp Cover × 1
5M power cord × 1
3M sync cable × 1
Lamp Shade × 1
Lamp Cover × 1
5M power cord × 1
3M sync cable × 1