These machines are manufactured and designed to meet the requirements of relevant standards,such as GB/T2423.17,JIS Z 2371,ASTM B-117 and more.It is used for test the ability of material to resist erodent by brine,those materials may be used in Electrical Appliances, Electrical wire accessories, luminaires etc.

 

Features:

* All accessories are comes from GERMAN,JAPAN and TAIWAN.Excellent accessories makes excellent testers.

* All PP and PVC construction,it can working in an acidic and alkaline environment never been aged.

* It can perform both Brine and Cupric Acetate test.

* Patent atomizing nozzle and coniform diffuse device makes fog more symmetrical.

* Provides spray capacity measuring barrel.

* Test period can be preset from 0.01s to 9999h freely.

* It can water into test chamber and saturation tower automatically or manually.

* Double over-heated protection system protect the security of both machine and operator.

* Temperature controller from OMRON(Japan) makes temperature precision reach ±0.1 Celsius degrees.

* It will demist the chamber automatically to make your view more convenient when test over.

* Temperature in test chamber can be rised quickly by an excellent titanium alloy heater from Taiwan.

* Cover was made by acrylic with thickness at 5mm from German.

* Provides lucite rods to hang or support specimens within the test chamber.

 

Technical parameter:

Internal dimensions(W*D*H cm):160*100*50

External dimensions(W*D*H cm):230*130*140

Test chamber capacity:800L

Salt solution reservoir:40L

Salt spray nozzle:2 pcs

Operating hours:72 h

Removable slotted sample rods:16 rods,12 shelves

Cover lift:Available

Saturation tower capacity:4L

Chamber construction:Polypropylene or PVC

Color:Gray

Temperature range

(PVC construction):Up to +60 degree C(Test chamber)

:Up to +70 degree C(Saturation tower)

Temperature range

(PP construction):Up to +70 degree C(Test chamber)

:Up to +80 degree C(Saturation tower)

Salt spray fall-out rates:Adjustable from 1.0 to 2.0 ml per 80 cm2 per hour

Spray pressure:0.8~2.0kgf/cm2(powered by compressed air)

Power supply:1 phase,voltage and frequency dependant on country/region of installation

Exhaust:Exhaust pipe should be terminated outside building

Drain:Drain pipe should be terminated into floor level drain