Hi-Co & Lo-Co Magstripe Reader/Writer (Encoder)
1. Reading/Writing magnetic stripe card complied with ISO formats
2. Reading/Writing Drivers Licenses
3. Read/Write High & Low Coercive (300~4000 Oe)
4. LED provides operational status
5. Writes any track combinations of 210 and/or 75 bpi data density
6. Program software for Windows 98/Me/XP /Vista
7. Manual Swipe to read and/or write card with RS-232 /USB output
8. Writing&verifying data on single, dual, or triple track in one swipe
9. +24VDC, 2.5A Max external power adapter attached
10. Dimensions of 212(L) x 64(W) x 63(H) mm
11. Dimensions of Box 290(L) x 180(W) x 100(H) mm

 

  

Specification
Electrical
Power requirements	+24VDC +/- 5%
Consumption	Typical 350mA Max.  600mA plus for each writing track
Power supply	External switching power 24V/2.5A
Interface	Serial or USB/serial
Ripple	50mVp-p or less
Dielectric strength	500 VDC for 1 minute

Performance
Read card	Track1	Track2	Track3
Bit per density	210 bpi	75/210bpi	210 bpi
Coercive force	Read/write 300-4000 oe Mag.card
Card thickness	0.76-1.2mm
Read speed	STD card	Jitter +/-15%	Amp. 60%
	5-55ips	5-50ips	5-50ips
Write speed	5-30ips
Write jitter	Interval < +/- 10%, Sub-interval < +/- 12%
Error rate	Read < 0.5%
	Write < 0.8%
Head life	Min. 1000K swipes for both read/write head

Mechanical
Body material	ABS 94V-0
Weight	Approx. 1.4kg
Dimension	212L x 64W x 63H mm
Swipe	Manual, single direction

Environments
Operation	-10 to 55oC, 10 to 85% humidity
Storage	-30 to 70oC, 10 to 90% humidity