Reinforcing Bar Welded Mesh/ welded wire
welded wire panel
welded big wire
Small construction Welded Wire Mesh Features:
With: Leveling touch ash, Mi Feng, large hoisting, splicing components, corrosion, fire, and the thermal insulation of human heavy and complicated construction and high-altitude operations, saving, rapid and environmentally friendly construction of high-quality housing. Its characteristics are: the whole assembly, more than two-layer steel mesh architecture and use its light weight, high strength, shape, location, bear the load of construction performance, the overall completion of concrete pouring unit, integration, complete building structure, maintenance, insulation, pipeline projects , and three-dimensional composite complete the housing construction and
Construction Welded Mesh Features:
Construction welded wire mesh panels on both sides of steel wire rack using concrete and mortar shop, after the formation of overall well plates, cement mortar can withstand pressure, to withstand tensile steel wire mesh, helical wire to withstand lateral shear in the middle of the polystyrene foam wiping Plastic not only to reduce weight and also enhance the insulation effect. Thus, the composite sheet material can be effectively used on each floor of my properties, has a good overall performance.
Construction welded wire mesh panels on both sides of steel wire rack using concrete and mortar shop, after the formation of overall well plates, cement mortar can withstand pressure, to withstand tensile steel wire mesh, helical wire to withstand lateral shear in the middle of the polystyrene foam wiping Plastic not only to reduce weight and also enhance the insulation effect. Thus, the composite sheet material can be effectively used on each floor of my properties, has a good overall performance.
Product Structure: Building welded wire mesh steel wire frame plate both sides of using concrete and mortar (later can be used as self-Regardless of the role of re-6 wall or load-bearing walls. Tests showed that a high-3000mm, thickness 113mm test wall panels, when the destruction of axial compression load achieve 560KN/m2, when the load for the eccentric load when the destruction reached 375KN/m2. Shule steel wire frame plate accompanied by lower side bars to work lower berth using concrete and mortar (the upper C15 beans Stone Concrete can also be used), the can be used as housing panel to use, tests showed that a span of 2300mm, polystyrene thickness 50mm, tension zone reprovision 150 steel, up and down the wiping 30mm thick cement mortar of housing estate boards, building steel wire welded wire mesh frame sandwich lightweight cement board has a high bearing capacity.
Construction characteristics of steel welded wire mesh wire mesh span>
With the development of technology, building gradually from a purely manual to industrial production forward. Using industrial production in recent years to strengthen the steel welding network to replace the traditional manual banding plate steel, welded steel engineering to enhance their use.
The traditional construction technique as follows: artificial arrangement of steel, artificial banding. This is consuming a lot of manual, due to the uncertainty of people, there will be such as misplaced steel model, steel spacing wrong, banding is not tight, less tied to drain tied to each other, In addition, as the need to stand on the steel banding, often occur reinforcement to be trampled tied at a bad situation. Extent that they may affect the quality of the building. In addition, as people' s own conditions, subject to physical, weather (eg rain) affect, is unable to continue the construction.
Construction steel welded wire mesh wire mesh appearance, then good for more than compensate for the shortcomings of man-made, steel net with industrial production methods, greatly improves production efficiency, saving a great deal of manual
|
Width of Welded Mesh Panel
|
1m-2.5m
|
Technical Note: Sizes can be customized.
|
|
Length of Welded Mesh Panel
|
1m-6m
|
|
|
Opening of Wire Mesh
|
2.54cm-30cm
|
|
|
Wire Diameter
|
2.5mm-10mm
|
Panel: Using high quality Iron Rod as raw material, the welded panel, after galvanization, Powders Primer, and Powders top coating; it can resist the corrosive and ultraviolet radiation very strongly.
Post: The finished surface usually is Galvanized and Powder coating, or alternatively, with plastic caps or Roofing rainhat. According to different type. Such as buying additional 50cm pass panels height into earth or with bottom based and so on. Fastenings: The panels and posts are jointed together with bolts or rivets, using the steel flat bar, or special steel clamps, all nuts are self-locking. This also can be designed as the special clients requests.
Property: Our mesh fence products enjoy such properties as corrosion resistance, aging resistance, sunshine resistance and weather resistance. Forms of corrosion resistance for mesh fencing products include electric galvanizing, hot-dip galvanizing, PVC sprayed coating and PVC dipped coating.
Choice of PVC Coating color :
Moss colors RAL6005
Grass green RAL6073
Snow white RALl9010
Anthracite RAL7016
Stone grey RAL7030
Every RAL color desired can be delivered, for example the colors corresponding to your corporate design.
| of Wire Mesh Fences | Spot welded by 3.5mm diameter quality mild steel wire, finished by PVC coating |
| Opening (mm) | 100x100 |
| LxW (mm) | 1000x2000 |
| PVC coating thickness (mm) | 0.7-0.8 |
| Support post (mm) | diameter 48x3x1100 |
| Base for burying the fence(mm) | 500x300x300 |
| Flange base (mm) | 150x150x8 |
|
welded wire mesh panels
|
|||
|
wire Gauge (mm)
|
aperture(m)× aperture(m)
|
width(m)
|
length(m)
|
|
2.0
|
1″ × 2″
|
2.5
|
5
|
|
2.5
|
2″ × 2″
|
2.5
|
5
|
|
3.0
|
2″ × 3″
|
2.5
|
5
|
|
3.5
|
3″ × 3″
|
2.5
|
5
|
|
4.0
|
3″ × 4″
|
2.5
|
5
|
|
4.5
|
4″ × 4″
|
2.5
|
5
|
|
5.0
|
4″ × 6″
|
2.5
|
5
|
and this is not all list, you can have other order to us