KWP2000 + Plus ECU Flasher ChipTuning Tool
KWP 2000 OBD

Read and Rewrite ECU to boost the power of car

READ and WRITE the flash data stored in the ECU. The stored data, called MAPS are responsible for things like injection timings, ignition advance, torque limiter, speed limiter and many more. By using this tool with the software provided you can read the MAPS and REWRITE the values to increase power and give you better fuel economy.

Petrol (Naturally Aspirated)

Remapping a petrol engine ECU can produce 10 - 15% BHP depending on exact specification, the engine will also be more responsive on initial acceleration and produce more torque (up to 20%) through out the entire rev range, giving more response on lighter throttle.

Petrol (Turbo)

Remapping a petrol turbo engine ECU can produce 20 - 30% BHP depending on exact specification, the engine will be significantly more responsive with power coming in immediately relative to throttle input with no lagging at higher revs. This large increase in power & torque gives far more flexibility in all gears reducing the need to change down unnecessarily to overtake safely and quickly.

Diesel (Turbo)

Remapping a diesel turbo engine ECU can produce 30 - 50% BHP and 60 - 75% torque depending on exact specification, diesel engines give the most impressive power and torque gains available. Extra power is gained through out the entire rev range and under all load conditions, the turning force gained from these engines is imence. This really is the best way of changing your car without having to change your car.

 

- Connects to USB

- Supports high speed ECU flashing

- Led Indications for USB-power/CAR-power/rx/tx

- Can read and write a lot more ECU's than the normal KWP2000 Software

 

Functions:

This Kit can be used to read and write flash dumps of the most recent ECU's

It is very easy to use - You need only a PC with Windows and a USB port

Restrictions:

- Backup of the ECU memory is not supported for some of the listed ECU`s here

- Some ECU`s can not be flashed over the OBD2 connector in the car, in this case you have to remove the ECU from the car and flash it _on desk_
 

Its easy just connect cable from your laptop to your car, run program and thats all!!!

Connect to your computer with Usb port and Obd2 to the car