Feature:
u These lathes can perform to turn face, cylingdrical surfaces and internal holes of various parts as well as metric, inch, module and pitch threads.
U The top slides can be operated individually by power for cutting short taper surface. Long taper surface can be turned automatically through the compound movement combining longitudinal feed with the top slide feed, moreover, the machines may be used for drilling, boring and trepanning.
U They have characteristics of high power, high spindle speed, high rigidity. The various ferrous and non-ferrous metals parts may be turned through the heavy outing by carbon alloytools.
|
Model
|
CW62-1000D
|
CW62-1250D
|
CW62-1400D
|
CW62-1600D
|
|
|
Code No.
|
101030
|
101031
|
101038
|
101039
|
|
|
CAPACITY
|
Max swing diameter over bed(mm)
|
1000
|
1250
|
1400
|
1600
|
|
Max swing diameter over cross slide(mm)
|
630
|
880
|
1030
|
1030
|
|
|
Width of bed(mm)
|
755
|
||||
|
Max length of workpiece(mm)
|
2000/3000/4000/5000/6000/7000/8000/9000/10000
|
||||
|
SPINDLE
|
Spindle nose
|
A15130
|
|||
|
Spindle bore diameter(mm)
|
130
|
||||
|
Taper of spindle bore
|
Metric No.140
|
||||
|
Range of spindle speed
|
3.15-315r/min.21kinds
|
||||
|
FEEDS
|
Longitudinal feeds range
|
0.1-12mm/r 56kinds
|
|||
|
Transversal feeds range
|
0.05-6mm.R 56kinds
|
||||
|
Metric threads range
|
1-120mm /44kinds
|
||||
|
Inch threads range
|
3/8-28tpi/31kinds
|
||||
|
Module threads range
|
0.5-60mm/45kinds
|
||||
|
Pitch threads range
|
1-56tpi/25kinds
|
||||
|
TAILSTOCK
|
Taper of tailstock sleeve
|
Morse No.6
|
|||
|
Travel of tailstock sleeve
|
300mm
|
||||
|
Diameter of tailstock sleeve
|
140mm
|
||||
|
MOTORS
|
Main motor power
|
22kw
|
|||
|
Rapid motor power
|
1.5kw
|
||||
|
Coolant pump power
|
0.125kw
|
||||
|
Standard:
u 4-jaw chuck 1000mm
u Steady rest(70-480mm)
u Following rest
u Center
|
Optional:
u Steady rest(400-700mm)
u Taper-turning device
u Chasing dial device
u 3-jaw chuck 500mm
|