This fingertip pulse oximeter is compact and light in weight, easy to use with only one-key operation. The internal alarm will function while low voltage. Automatically power off after 8 seconds when finger out. The continuous working time can be 39 hours.
l LED monitor for extended battery life
l SpO2 and pulse monitoring, and histogram of pulse display
l Easy to use with one-key operation
l Small in size, and easy to carry
l Low voltage alarm display
l Auto power-off after 8 seconds without signal
l Light weight of 50g, batteries included
l Runs on standard AAA batteries and continuous working time is 39 hours
l Display Format: LED
SPO2:35-99% in two-digit 7-segment digital
Pulse Ratio:30-240BPM in 3-digit 7-segment digital;
Pulse Wave: 6-segment barograph;
Battery Voltage Low Indication: LED signals
SPO2:35-99% in two-digit 7-segment digital
Pulse Ratio:30-240BPM in 3-digit 7-segment digital;
Pulse Wave: 6-segment barograph;
Battery Voltage Low Indication: LED signals
Dimension:58(L) × 30(W) × 36(H)
Weight:55g (including batteries)
l Power Requirements: 2 AAA size 1.5V Alkaline Batteries
l Power Consumption: less than 40mA.
l Resolution: ±1% for SPO2 and ±1 BPM for Pulse Ratio.
l Measurement Accuracy: ±2% in stage of 70%-99% SPO2 and meaningless when stage being smaller than 70%. ±2 BPM for Pulse Ratio.
l Measurement Performance in Weak Filling Condition: Oxy haemoglobin and pulse value can be shown correctly when pulse-filling ratio is 0.5%.
l Interference Resistance Capacity against Ambient Light: Deviation is smaller than ±1% between value of Oxy haemoglobin measured in natural lighting indoor condition and present lighting sources and that measured in dark room.
l It is equipped with a function switch, through which the Oximeter can be automatically powered off when no finger is in the Oximeter more than 8 seconds.