1.Usage

   WAY Series vibrating equipment are ideal vibrating equipment in many industries such as mine, metallurgy, chemical industry, electric power, fire-resistant, etc.

2. This series can move like circular, compared with other vibrating screen , it has several advantages:

  (1) The materials move forward like circular, symmetrical material to increase vibrating efficiency.

(2) Simple structure, small maintenance, small investment and low noises.

(3) This series product can be used in close structure to prevent powder away and protect environment.

(4) Work with other equipment to increase automation

Principle and structure feature

The series consists of screen box, screen seat, electronic motors bracket, damping spring, vibration exciter, and motor.

Usage and maintenance:

a.Should prevent to start with materials on the machine and clean sundries around vibrating machine before starting.

b.Should stop running to check if operate unbalanced or un-normal sound during working.

c.Regularly check the fastness of all bolts of connecting parts, tighten immediately if bolts become flexible.

d.User should maintain and serve the vibrating motor according to the vibrating motor manual(The grease of the vibrating motor is added generally once every three months. The exciting machine should add grease once a month, a small repair for 6 months, and a major repair for one year)

e.Should clean spring regularly.

Installation and test:

a. Check the concrete foundation, bolts and steer plate according to installation chart before installation. The allowable error is within3mm.

b. The series must install on sequence from the bottom to the up, every steps must be adjusted to the primary status before the install of nest steps.

c. Should adjust the mesh to the appropriate place after vibrating screen installation. Both first and second damping spring should keep vertical status. The axes of the vibrating motor should be lower 3-5mm than that of exciting machine. Weld the motor bracket ,spring seat and steel plate.

d. Make sure the spinning directions of two vibrating motors are reverse.

e. The screen can run for 4-6hours under no-load state inquiring the operating balance of the screen body, without swing and un-normal sound. Check the fastness of the screen boards and exciter machine.

f. The temperature of the shaft should not be over 75 centigrade.

g. User should maintain and serve the vibrating motor according to the vibrating motor manual(The grease of the vibrating motor is added generally once every three months. The exciting machine should add grease once a month, a small repair for 6 months, and a major repair for one year)