SHF series high temperature furnaces for laboratory are perfectly designed, which congregate many patents and are very safe, reliable, and practical.

1.      Maximum temperature: 1000℃/1200℃

2.      Adopting vacuum molding technology, the heating wire is inlaid in the surface of the ceramic board and is exposed, which is in favor of heat radiation.

3.      The heating elements are set on the four sidewalls inside the chamber. The heating elements can be taken down and replaced.

4.      Have double-layer stainless housing. The heat is insulated by the circulating air. Adopting special insulating design, the temperature of the outside surface is very low.

5.      Quick-opening door design, easy to load and unload. Have double doors. The housing adopts pressing-vessel welding technology. Vacuum degree: 0.01Pa , or2MPa

6.      Have automatic power failure protective function once the door is open. Have over temperature alarm function. Have power failure function once the thermocouple is damaged. Have controlling function with the built-in parameter pass code.

7.      Heating rate: 5-20℃/min. 30-segment automatically heating up programs

8.      Provide RS-485 communication port and Sigma data management software, which can record the history data and the temperature rising curve, correct the temperature deviated error, and manage multi-equipments and remote failure analysis.

9.      Multiple safety protective design. It’s very safe and durable.