Meiah is trade mark of Weadell’s ESD HPL, it uses a unique, grounded conductive layer that completely drains voltage away from your work surface. With its lifetime electrical properties, critical and valuable electronic components will never be vulnerable to work surface static again.
Properties Including:
• Surface to ground less than 3 x 10^8 ohms.
• Offers low electrical resistance.
• Absolute charge drainage and zero-voltage suppression.
• Exhibits no voltage suppression and dissipates a 5,000-volt static charge to zero in less than 0.01 second per FTM-101C at 5 to 95 percent relative humidity.
All Electrostat products meet the requirements of
BS IEC 61340-5-1.
• Volume resistivity for all materials >7.5 x 105 - <1 x 109Ω
• Uniform, controlled dissipation of static electricity across
all Electrostat materials.
• Electrostat products are compatible with other ESD
products to provide a complete ESD solution.
• Electrostat surface materials have excellent resistance to
organic solvents, weak acids, heat and abrasion.
• Manufactured composites using the Electrostat raw
chipboard do not require a surface mounted grounding
stud.
• All Electrostat surface materials are visually compatible
Properties Including:
• Surface to ground less than 3 x 10^8 ohms.
• Offers low electrical resistance.
• Absolute charge drainage and zero-voltage suppression.
• Exhibits no voltage suppression and dissipates a 5,000-volt static charge to zero in less than 0.01 second per FTM-101C at 5 to 95 percent relative humidity.
Description:
Computer Room Access Flooring system Using HPL tiles
HPL tile System can be customized to the specific needs of computer rooms with heavy equipment such as mainframes or servers. The tiles are fixed to flat head pedestal and stringers to enhance their load carrying performances. Available in a choice of HPL Anti-Static, complies with static electrical dissipation needs of computer room/ clean room applications
Because of adopting nano-tenology in resin, MEIAH antistatic HPL becomes to be reality that antistatic floor should be used where permanent static dissipation properties are required.
Computer Room Access Flooring system Using HPL tiles
HPL tile System can be customized to the specific needs of computer rooms with heavy equipment such as mainframes or servers. The tiles are fixed to flat head pedestal and stringers to enhance their load carrying performances. Available in a choice of HPL Anti-Static, complies with static electrical dissipation needs of computer room/ clean room applications
Because of adopting nano-tenology in resin, MEIAH antistatic HPL becomes to be reality that antistatic floor should be used where permanent static dissipation properties are required.
Keywords:
laminate floor tile, Anti-static HPL, ESD HPL, ESD laminate, Anti-static laminate, HPL tile for raised access floor, HPL tile, ESD tile, anti-static tile, raised floor tile, resistance against electro-static charges
Features:
Anti-static, wear-resistance, fire-retardant, easy to maintain,
Specification:
volume resistance: 1x 10E6 to 8x 10E8 ohms
GRADE 1
Nominal Thickness - 1/8" (3.2mm)
Actual Thickness - .123" (3.1mm) +0-.011" (.28mm)
Nominal Size - 24" x 24" (610mm x 610 mm) (or as ordered)
Cutting Tolerance - +0-.020" (+0-.51mm)
Diagonal Tolerance 0 within .035" (.9mm)
GRADE 2
Nominal thickness - 1/16" (1.6mm)
Actual Thickness - .062" (1.6mm) +- .005" (.13mm)
All grades may be purchased in either full size sheets (i.e., 4 ft.x 8 ft.) (121.92 cm x 243.84 cm) or cut-to size.
Wear-resistance: 3000cycles or as ordered
laminate floor tile, Anti-static HPL, ESD HPL, ESD laminate, Anti-static laminate, HPL tile for raised access floor, HPL tile, ESD tile, anti-static tile, raised floor tile, resistance against electro-static charges
Features:
Anti-static, wear-resistance, fire-retardant, easy to maintain,
Specification:
volume resistance: 1x 10E6 to 8x 10E8 ohms
GRADE 1
Nominal Thickness - 1/8" (3.2mm)
Actual Thickness - .123" (3.1mm) +0-.011" (.28mm)
Nominal Size - 24" x 24" (610mm x 610 mm) (or as ordered)
Cutting Tolerance - +0-.020" (+0-.51mm)
Diagonal Tolerance 0 within .035" (.9mm)
GRADE 2
Nominal thickness - 1/16" (1.6mm)
Actual Thickness - .062" (1.6mm) +- .005" (.13mm)
All grades may be purchased in either full size sheets (i.e., 4 ft.x 8 ft.) (121.92 cm x 243.84 cm) or cut-to size.
Wear-resistance: 3000cycles or as ordered
All Electrostat products meet the requirements of
BS IEC 61340-5-1.
• Volume resistivity for all materials >7.5 x 105 - <1 x 109Ω
• Uniform, controlled dissipation of static electricity across
all Electrostat materials.
• Electrostat products are compatible with other ESD
products to provide a complete ESD solution.
• Electrostat surface materials have excellent resistance to
organic solvents, weak acids, heat and abrasion.
• Manufactured composites using the Electrostat raw
chipboard do not require a surface mounted grounding
stud.
• All Electrostat surface materials are visually compatible