PVC door and window different profile＆#58
SY Series plastic door’s and window’s profiles extrusion line adopts the PVC powder lot to manufacture various plastic door’s and window’s profiles, the decorative sections etc. The line executes the optimized design for the unit. It has the advantages such as even plastification, small shear rate, high output, long use life and so on. The set is composed of the conial tein-screw extruder, vacuum forming table, tractor, cutting laminator, stirring-up rack etc. The main frame employs the AC frequency conversion or the DC silicon-controllable drive. The temperature-control instrument adopts intelligent temperature-control instrument. The auxiliary vacuum pump and the extruder’s power use the excellent products whose rate of malfunction is extremely low.
The forming table may adopt the specifications such as 4m, 6m, 8m, 11m etc according to different moulds. It is equipped with the parallel twin-screw main frame, which is especially suitable for the high-speed extrusion of the profiles.
Main Technical Parameter
|
Model
Parameter
|
SY-180
|
Sy-240
|
SY-300
|
|
Main machine model
|
SJSZ50
|
SJSZ65
|
SJSZ80
|
|
Screw diameter (mm)
|
50/105
|
65/172
|
80/172
|
|
Screw speed (r/min)
|
1~40
|
1~38
|
1~36.9
|
|
Total power (k w)
|
55
|
90
|
110
|
|
Output capacity (kg/h)
|
80~100
|
180~220
|
300~350
|
|
Tractor speed (m/min)
|
0.6~6
|
0.4~4
|
0.5~5
|
|
Width of product (mm)
|
180
|
240
|
300
|
|
Cooling water (m3/h)
|
5
|
7
|
10
|
|
Air compression pressure (M pa)
|
0.6
|
0.6
|
0.6
|
|
Machine weight (T)
|
5
|
7
|
10
|