1. Aluminum Molding Material Winding Round Machine is used for bending aluminum door profiles.
2. The system can make it easier for T-bend, U-, E-type, such as the cross-section profiles;
3. Mold can be bent through a dedicated system for other sections of the profiles;
4. The mold is made of nylon so that the profiles are not so easy to injury.
Power:
|
380V 50Hz (three-phase four-wire)
|
Power:
|
0.55KW
|
Can bend the largest cross-section profiles:
|
100 × 25mm
|
Can turn the smallest diameter circular:
|
Φ450mm (the largest cross-section profiles for Φ800mm)
|
Wheel diameter:
|
120mm
|
Wheel speed:
|
45rpm
|
Size:
|
(length width × high ×) 610mm × 610mm × 1200mm
|