The crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening.
During operation, the motor drives the eccentric shaft shell to turn around through ahorizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.
|
Specifications of Cone Crusher |
|
Type |
Outside diameter
Of crushing cone(mm) |
Max feed size
(mm) |
The adjusting range of discharger
(mm) |
Crushing capacity
(t/h) |
Electric motor power
(kw) |
Speed of Eccentric shaft
(r/min) |
weight
(T) |
Overall dimensions
(LхWхH)(mm) |
|
PYB |
600 |
600 |
65 |
15-25 |
40 |
30 |
356 |
5 |
2234х1370х1675 |
|
PYD |
35 |
3-13 |
12-23 |
5.5 |
2234х1370х1675 |
|
PYB |
900 |
900 |
115 |
15-30 |
50-90 |
55 |
333 |
11.2 |
2692х1640х2350 |
|
PYZ |
60 |
5-20 |
30-65 |
11.2 |
2692х1640х2350 |
|
PYD |
50 |
3-13 |
15-50 |
11.3 |
2692х1640х2350 |
|
PYB |
1200 |
1200 |
145 |
20-50 |
110-168 |
110 |
300 |
24.7 |
2790х1878х2844 |
|
PYZ |
100 |
8-25 |
42-135 |
25 |
2790х1878х2844 |
|
PYD |
50 |
3-15 |
18-105 |
25.3 |
2790х1878х2844 |
|
PYB |
1750 |
1750 |
215 |
25-50 |
280-480 |
160 |
245 |
50.3 |
3910х2894х3809 |
|
PYZ |
185 |
10-30 |
115-320 |
50.3 |
3910х2894х3809 |
|
PYD |
85 |
5-13 |
75-230 |
50.2 |
3910х2894х3809 |
|
PYB |
2200 |
2200 |
300 |
30-60 |
59-1000 |
280-260 |
220 |
80 |
4622х3302х4470 |
|
PYZ |
230 |
10-30 |
200-580 |
80 |
4622х3302х4470 |
|
PYD |
100 |
5-15 |
120-340 |
81.4 |
4622х3302х4470 |
|
