ALLScanner for Subaru Select Monitor III Compatiable Professional Kit, SM3 hardware work with ALLScanner VCI interface, software enjoy with professional SM3 software. Competetive price with the valuable function performance as the original kit. Below is a brief introduction of Subaru SSM, ALLScanner version SM3 is fully compatiable with it.

 Features
* All System Diagnosis. Selecting this item displays on a single screen the fault detect status of all control system control modules for
  which SSM ? diagnosis is supported, and memorized diagnostic codes.
* Each System Check. Selecting this item makes it possible to select a particular system from among the control systems for which
  SSM ? diagnosis is supported, and perform fault diagnosis. This item can be used to view input/output data of the system control
  modules that perform fault diagnosis, memorized diagnostic codes, and other data on the PC display. This menu item is also used
  after repair work is complete to delete diagnostic codes, to configure control module settings, etc.
* Saved Data Display. This item can be used to save various data sampled during fault diagnosis operations, and to load data for viewing
  after work is complete.
* Immobilizer. This item performs immobilizer registration, need dealer's authorization.
* Reprogram. This item performs reprogramming of the control module.
* Read CF application measurement data. This item performs reading stand alone measurement data saved in a CF card to hard disk
  of your PC.
* Convert/Save measurement data on driving recorder. Loads data sampled on the driving recorder to the PC from the CF card, and
   converts and saves that data.
* Oscilloscope. After attaching the optional pulse/analog cartridge to SDI, connect the pulse/analog box to the SDI and using pulse/analog
  probe to perform analog sampling.