Introduction of Water chillers
Water Heaters are used to heat up the mould and maintain temperature, although they can be used in other similar
applications. High temperature water from the mould is returned to the cooling tank and cooled by indirect cooling. It is then pressurized by the high - pressure pump, sent to the heating tank and finally to the mould with a constant temperature. The OMRON temperature controller can maintain an accuracy of ± 1℃.
Application of Water Heaters: Precision plastic injection molding temperature control, Extrusion temperature control, Roller heating temperature control, Foam product line temperature control, etc..
Specifications
|
||||||
Model
|
Unit
|
KWM-05(A)
|
KWM-10(A)
|
KWM-20
|
KWP-10
|
KWMD-10
|
Temp. Range
|
℃
|
120℃
|
||||
Temp. Control Accuracy
|
℃
|
±1℃
|
±0.1℃
|
±1℃
|
||
Power Supply
|
|
AC3∮380V 50HZ3P+E(5M)
|
||||
Heat Transfer Medium
|
|
Water
|
||||
Cooling Method
|
|
Direct Cooling
|
||||
Heating Capacity
|
KW
|
6
|
9
|
9
|
9
|
9+9
|
Pump Power
|
HP
|
0.5
|
1
|
2
|
1
|
1+1
|
Pump Flow
|
L/MIN
|
35
|
100
|
180
|
100
|
100+100
|
Pump Pressure
|
Kg/CM2
|
2
|
2.2
|
2.4
|
2.2
|
2.2
|
Power Supply
|
KW
|
7
|
10
|
11
|
10
|
20
|
Alarm Function
|
|
Open Phase/Water Shortage/Overheating /Overloading/Reverse Turn
|
||||
Cooling Water Pipe
|
INCH
|
1/2
|
1/2
|
1/2
|
1/2
|
1/2
|
Circulating Water Pipe
|
INCH
|
3/8x2
|
3/8x2
|
3/8x4
|
3/8x4
|
(3/8x4)x2
|
Size(L x W x H)
|
MM
|
620x325x645
|
620x325x645
|
620x325x645
|
800x325x640
|
620x550x645
|
Weight
|
Kg
|
62
|
72
|
75
|
62
|
110
|
Specifications above are subject to change without prior notice; some special specifications may be customized.